boguing · Nov 2, 2015

As Intarweb rants go, that was pretty impressive for one of tender years. Keep it up, but do avoid the blue box stuff if you want to stay sane. Your welding's getting much better too!

honolulujoe · Nov 3, 2015

was one of those rails full of mud?

ProcrastinatorFraser · Nov 3, 2015

boguing said:
As Intarweb rants go, that was pretty impressive for one of tender years. Keep it up, but do avoid the blue box stuff if you want to stay sane. Your welding's getting much better too!

My dad taught me all i need to know

I'm trying to avoid the britpart crap, in the shipment of parts i just got i've got bearmach,Glyco, Karsons, genuine LR, and i've got some britpart, namely camshaft bearings, oil pressure switch, water temp sender, and air hose.
Not much britpart, shame i couldn't get anything better for the cam bearings on paddocks.
Thanks also, i got a few more nice welds with the hangers today too. I guess all i have to say is thank feck for that lol

ProcrastinatorFraser · Nov 3, 2015

honolulujoe said:
was one of those rails full of mud?

Yes, it was, full of mud, acorns, leaves, rocks, rust, metal, just about anything you could think of, was in the chassis rails lol

ProcrastinatorFraser · Nov 3, 2015

Would it be bad to say the only thing getting me through the lows with this chassis is phil collins?

Bobsticle · Nov 3, 2015

ProcrastinatorFraser said:
Would it be bad to say the only thing getting me through the lows with this chassis is phil collins?

Oh thats bad. I tend to reach for the napalm death.................. Smash a single digit.

boguing · Nov 3, 2015

ProcrastinatorFraser said:
Would it be bad to say the only thing getting me through the lows with this chassis is phil collins?

Separate leaves or hanger long enough?

ProcrastinatorFraser · Nov 3, 2015

boguing said:
Separate leaves or hanger long enough?

Neither

ProcrastinatorFraser · Nov 4, 2015

Do you know if welders degrade over time, cos the arc aint doing as well as it was.
Also, do you think a 100amp mig gasless welder will weld 2mm thick steel?

Blackburn · Nov 4, 2015

Are the rods dry try baking them in the oven 1st.

ProcrastinatorFraser · Nov 5, 2015

Blackburn said:
Are the rods dry try baking them in the oven 1st.

That's a good idea.. i'll try that thanks.

Jam1 · Nov 5, 2015

It's best to bake the rods dry as suggested, but you can dry them whilst welding by striking them on the work piece or a bit of scrap and holding them there without the welding gap and they soon dry out.

ProcrastinatorFraser · Nov 5, 2015

Jam1 said:
It's best to bake the rods dry as suggested, but you can dry them whilst welding by striking them on the work piece or a bit of scrap and holding them there without the welding gap and they soon dry out.

I saw a friend do that once, good to keep that in mind.

ProcrastinatorFraser · Nov 7, 2015

Right, the last parcel just arrived an hour ago. I should get to work shouldn't i?

ProcrastinatorFraser · Nov 7, 2015

New pics soon.

ProcrastinatorFraser · Nov 7, 2015

jamesmartin · Nov 7, 2015

you will have a decent chassis once its all painted and finished

ProcrastinatorFraser · Nov 7, 2015

jamesmartin said:
you will have a decent chassis once its all painted and finished

One would hope

ProcrastinatorFraser · Nov 8, 2015

Well after 3 weeks all my parcels arrived, as you may have heard. Though, missing parts:
Valve stem oil seals
Gasket overhaul set.
FOR FUUUUUCCCCKKKKSSS SSSAAAAKKKKKEEEEEEEEEEE

ProcrastinatorFraser · Nov 13, 2015

Okay, looks like i have been inactive for the passed week, thats because i have. Sorry.
Other work, school mainly, and sadly close family friend passing away has put the project aside for the moment.
I'll get some more parts soon-ish, so i can get the block and head re-done, but that's all i can promise for now. Again, sorry everyone.

Well-Known Member

Well-Known Member

Active Member

Active Member

Active Member

De Villes Advocaat

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Similar threads