Wagon Loon
Well-Known Member
This part is ready for reassembly
So it's on with the bottom heater/ shelf part of the lower dash.
Getting the top plate off and recording the control cable arrangement
It doesn't look very pretty, but I'll have to make up some parts like the foam seal inside, of its not available.
It's not committing off without a fight, because it's stuck to rust.
So it's on with the bottom heater/ shelf part of the lower dash.
Getting the top plate off and recording the control cable arrangement
It doesn't look very pretty, but I'll have to make up some parts like the foam seal inside, of its not available.
It's not committing off without a fight, because it's stuck to rust.