Re-fitted interior bits....including new sound proofing made from 'closed cell' stuff.




gave bumper inside and end of Chassis, 2 coats bonda primer







does anyone know if bog standard evo stick contact adhesive will be ok to stick this bit down ??

 
Cracking job
when I started reading this I felt for you, rust and holes everywhere
but you have done it another skill learned
 
Thanks greyhair,

It was a daunting task, and I should have scrapped it, but buying another one would have probably been just as bad. The motor/mechanics are all good, as I've got a shed load of receipts from the previous owner.......anything wrong and they took it straight to the garage, so hopefully I'll have no problems there.!!

I know the n/s front is almost as bad , but I know what I'm doing now, and hopefully it won't take as long to do next year.

.......... Then there's the rear to look at, leaky sunroofs ......lol
 
Just given the o/s of bumper 3 coats of rattle tin satin spray.
I got good coverage etc. but not being familiar with spraying........is that enough ?
 

Similar threads