nrgserv

Well-Known Member

• Sep 25, 2014

• #121

Chrisw8 said:

Oooooo......double posting

Click to expand...

exited!

well done !

 

Chrisw8

Well-Known Member

• Oct 3, 2014

• #122

Re-fitted interior bits....including new sound proofing made from 'closed cell' stuff.




gave bumper inside and end of Chassis, 2 coats bonda primer







does anyone know if bog standard evo stick contact adhesive will be ok to stick this bit down ??

 

Brown

Well-Known Member

Full Member

• Oct 4, 2014

• #123

Don't see why not. Glue it and put something heavy on it while it sets.

 

greyhair

Well-Known Member

• Oct 6, 2014

• #124

Cracking job
when I started reading this I felt for you, rust and holes everywhere
but you have done it another skill learned

 

Chrisw8

Well-Known Member

• Oct 6, 2014

• #125

Thanks greyhair,

It was a daunting task, and I should have scrapped it, but buying another one would have probably been just as bad. The motor/mechanics are all good, as I've got a shed load of receipts from the previous owner.......anything wrong and they took it straight to the garage, so hopefully I'll have no problems there.!!

I know the n/s front is almost as bad , but I know what I'm doing now, and hopefully it won't take as long to do next year.

.......... Then there's the rear to look at, leaky sunroofs ......lol

 

Chrisw8

Well-Known Member

• Oct 7, 2014

• #126

Just given the o/s of bumper 3 coats of rattle tin satin spray.
I got good coverage etc. but not being familiar with spraying........is that enough ?