Callum-d90

Callum-d90

New Member
Hi all, I'd like a little advise as to weather a td5 bulkhead would fit onto my 2.5 petrol 90 ive converted it to a 200tdi now needs a bulkhead and would like a td5 one for it.

Is it an easy swop? I'm a fabricator by trade so cutting/welding not a problem, it's more electics ect I'm bothered about
 
Same size and all, your dash will need to be a TD5 one though unless you feel like bodging the old one on

Might just have to modify a couple of points to make it fit
 
A 200tdi dash will fit and possibly a 300tdi anaw;)
If ye stick some maskin' tape around connectors etc and number them, then it makes life a wee bit easier;):D
 
Dr_evil said:
Ahhhh thought they had different mounting points ?
Click to expand...

not really (from what ah can remember). Ah only had tae drill some holes and block some up, remove the td5 wiper motor bracket, drill some holes fur the lower dash/ heater box channel thingy and fit some nutserts/ rivnuts (basically);):D
 
Mmmmm in that case do you know if I can get a defender dash into a series easily ?



Sorry for the Hi-Jack
 
Dr_evil said:
I shall have a rummage through google then, cheers buster
Click to expand...

Is that for your v8?
the only real differences i notice between my 110 v8 and my old s3 is, the 110 has a fuse box under the dash and is therefore different in that area. the s111 has a notch that fits snug to the lower dash. If you have a look at my 110 rebuild thread you can almost see how the bulkhead looks empty. Windscreen hinge area also different
 
Callum-d90 said:
Hi all, I'd like a little advise as to weather a td5 bulkhead would fit onto my 2.5 petrol 90 ive converted it to a 200tdi now needs a bulkhead and would like a td5 one for it.

Is it an easy swop? I'm a fabricator by trade so cutting/welding not a problem, it's more electics ect I'm bothered about
Click to expand...
its a common fix for rotten bulkhead ,there are all basically the same on defenders 90/110s as buster said just a few rivenuts ,and spray with thinned waxoyl or similar after inside all cavities after you get it built
 
If I get one with the td5 dash still attached it will go in then? It's the dash I'm after really with the centre console ect? As for wires they all similar?

Cheers for help lads :)
 
Like this:
 

Attachments

  • land rover 1 (150).JPG
    land rover 1 (150).JPG
    279.4 KB · Views: 797
You must log in or register to reply here.

Similar threads

H
D2 ABS Sensors
Replies
3
Views
293
sierrafery
sierrafery
J
Series 2a cutting out on incline
Replies
18
Views
906
tottot
tottot
dag019
I have bought a station wagon
5 6 7
Replies
125
Views
9K
Knappster
Knappster
M
Discovery1 lt230 in place of LT230R from a 12D?
Replies
3
Views
853
MrF
M
dag019
Hypothetical project feasibility
Replies
17
Views
2K
FlyingPete
FlyingPete