is there any difference in getting a recond unit from Bell and getting a new one from evil bay ?

recon is £200 and new with GKN bearings is £380ish?
 
sijwhite said:
You'll get a 'real' VCU from Bell. Pot luck with eBay.
Click to expand...
Not technically true. Only GKN knows the correct match of fluid and amount inside. You can only buy a "real" one new. All re-conners have guessed and none of them agree.
 
Hippo said:
Not technically true. Only GKN knows the correct match of fluid and amount inside. You can only buy a "real" one new. All re-conners have guessed and none of them agree.
Click to expand...

Okay, fair point, well made.

It does seem that Bell can be relied upon though. Not so sure about some of the traders on eBay.
 
Hippo said:
Not technically true. Only GKN knows the correct match of fluid and amount inside. You can only buy a "real" one new. All re-conners have guessed and none of them agree.
Click to expand...

Mmmmmm we didn't guess!! We rebuilt and tested many many times until they behaved the same.
 
no idea if IRD still works but i defintately drives better now, 200 for the VCU, 30 for both bearings and 15 postage (collection and delivery included) so 245 all in and 14 days to return your old vcu, or 70 surplus charge
 
can anyone help me I have a 2.0 td4 with a seized viscous coupling and I would like to overhaul the unit myself.
I have sourced the silicone fluid just wondering if anyone hade done this before to guide me in the wright direction many thanks
Daniel
 
There are a couple of threads on here where people have rebuilt VCUs themselves, if you search, you should find them.

How did you know which silicone fluid spec to use?
 
You'll either need some fancy metal cutting & welding experience, or quite a bit of time and effort clearing out the old (basically) solidified c**p through peep holes. Then you've got plenty of ways it can go wrong that'll probably take a bit of trial and error to sort out.

They're not hugely expensive, so its is a job you take on because you "want to do it".
 
My fluid wasn't solid when my old vcu failed. I drilled a hole in the side at the top. I kept the hole at the top and the fuild started to ooze out by itself. Not all, but far more than eggspected. :eek:
 
Last edited:
i would have a look on ebay im looking myself well soon will be i have seen some good refurb units with warranty failing that you could always take a chance on someone who is breaking one for parts again loads on ebay good luck anyway mate
 
Yer can't beat the satisfaction of lying under yer heap in the deepest of winter, freezing yer fingers oft until they hurt, struggling to fit yer own props/vcu. If yer haven't done it yer int lived. :p
 
Getting mine done just after easter by Bell ..... Sorry Hippo know what you mean nowt like a job well done, done by yourself, but for the extra no point freezing your bits off.... plus don't fancy doing it road side...
 
marti666 said:
Getting mine done just after easter by Bell ..... Sorry Hippo know what you mean nowt like a job well done, done by yourself, but for the extra no point freezing your bits off.... plus don't fancy doing it road side...
Click to expand...
Had mine done Tuesday, thanks Austen for fitting me in during your holiday's. Done 1000 miles the hippo seems run with less drag..... and reversing better. £320 all in including new bearings bargain.
 
You must log in or register to reply here.

Similar threads

MollyNomad
IRD REMOVAL AND TURBO WORRIES
Replies
13
Views
1K
MollyNomad
MollyNomad
xDParis64
VCU test result + Lift Kit
Replies
8
Views
1K
xDParis64
xDParis64
W
Freelander 1 TD4 rumble from..?
Replies
7
Views
2K
Nodge68
Nodge68
N
Rear diff issues
Replies
5
Views
807
niko-h
N
F
My 2006 Freelander TD4 Commerical
Replies
8
Views
608
Andy Warren
Andy Warren