thequeenscheese

Well-Known Member

• Dec 13, 2014

• #1

Just a quickie for my peace of mind and if anything goes awry or when lol..

The rear wiper isn't parking back on the rubber 100% what causes this-guessing a sensor? And where is it?
Rear window is working fine also
Cheers..

 

longdog

Active Member

• Dec 13, 2014

• #2

Eccentric cam in the wiper motor will have seized, explains how it should work in rave.

 

B

Brack

Well-Known Member

• Dec 14, 2014

• #3

Does the dash switch for the rear window work? - if it does then the rear wiper is parked enough so don't worry about it.

 

longdog

Active Member

• Dec 14, 2014

• #4

The motor spindle will be in the right position, it's just the cam wont have put the arm down far enough.

 

B

Brack

Well-Known Member

• Dec 14, 2014

• #5

If all is working, just take the wiper arm off and re position it ... keeps the blade from freezing onto the glass in this weather

 

thequeenscheese

Well-Known Member

• Dec 14, 2014

• #6

Righto cheers it does work fine so nothing to worry about then, just the pesky wash on it to suss out next I'm guessing the filter Volcker in the tank for that..

 

ZDomZ

New Member

• Dec 14, 2014

• #7

Sorry Brack but It's not to prevent the blade freezing to the glass . It parks on the rubber so the window opens fully.

 

B

Brack

Well-Known Member

• Dec 14, 2014

• #8

ZDomZ said:

Sorry Brack but It's not to prevent the blade freezing to the glass . It parks on the rubber so the window opens fully.

Click to expand...

Thats ok mate, I know ...reason I said it is because his wiper is not parking 100% off the glass as it should - so could freeze on thats all

 

ZDomZ

New Member

• Dec 14, 2014

• #9

😎