thequeenscheese

Well-Known Member
Just a quickie for my peace of mind and if anything goes awry or when lol..

The rear wiper isn't parking back on the rubber 100% what causes this-guessing a sensor? And where is it?
Rear window is working fine also
Cheers..
 
Does the dash switch for the rear window work? - if it does then the rear wiper is parked enough so don't worry about it.
 
The motor spindle will be in the right position, it's just the cam wont have put the arm down far enough.
 
If all is working, just take the wiper arm off and re position it ... keeps the blade from freezing onto the glass in this weather :)
 
Righto cheers it does work fine so nothing to worry about then, just the pesky wash on it to suss out next I'm guessing the filter Volcker in the tank for that..
 
Sorry Brack but It's not to prevent the blade freezing to the glass . It parks on the rubber so the window opens fully.
 
Sorry Brack but It's not to prevent the blade freezing to the glass . It parks on the rubber so the window opens fully.

Thats ok mate, I know ...reason I said it is because his wiper is not parking 100% off the glass as it should - so could freeze on thats all :)
 

Similar threads