malcolm_durant
Active Member
Take it you mean replacing the airbags..?
There are some very good "how to" articles out there (rangerovers.net for example). Seems to be theoretically straightforward, except the clips will be rusted sold and you'll have hours of fun trying to get the old bags off.
I'll tell you from personal, bitter experience in a few weeks...
Malcolm
There are some very good "how to" articles out there (rangerovers.net for example). Seems to be theoretically straightforward, except the clips will be rusted sold and you'll have hours of fun trying to get the old bags off.
I'll tell you from personal, bitter experience in a few weeks...
Malcolm
Once you get the wheel off it should take about 30 min. I also bought a new set of clips and pins as my old one were stuck solid. Make sure you have a large enough pry bars. I had to use a bit of brute force to seperate the bottom of the airbag from the chassis as mine had welded together.
Good luck
Good luck
No worries. 20 mins start - to -finish on the first one and less than 15 for the second. Gentle persuasion ( i.e. crowbar) was req'd for the removal of the alloy seats at the bottom and grease and patience to locate the retaining pins.
Go on......Save yourself a mint and have a go.
Go on......Save yourself a mint and have a go.
