08mckerp

New Member

• Aug 9, 2010

• #1

Hi, i recently put a disco 200tdi into me old TD, now rebuilding ona galv chassis. Obv i had to lower the rad mounts wen doing the conversion. Got a 200tdi chassis but the rad mounts are the same height as the old ones used to be. Is this cos the disco frame is different? and will a def 200tdi rad fit instead? cant believe they made 2 different size rads and intercoolers for the disco and def.? or are the top wing brakets different?? cheers

 

wiltshire landyman

I’m back

• Aug 9, 2010

• #2

nope both rads and intercoolers are the same..i know cos at the weekend i put a new 300 tdi disco rad and intercooler into my defender 200 tdi rad frame..the disco rad frame will fit with mods

 

08mckerp

New Member

• Aug 9, 2010

• #3

yer i could go down the lowerin the mounts route again but would rather limit the amount of cuttin and stuff i hav to do to the galv chassis guess the top mounts on the wings are different

 

wiltshire landyman

I’m back

• Aug 9, 2010

• #4

08mckerp said:

yer i could go down the lowerin the mounts route again but would rather limit the amount of cuttin and stuff i hav to do to the galv chassis guess the top mounts on the wings are different

Click to expand...

u dont need the mounts on the side of the disco rad frame
dont you have the mounts that bolt to the top of the slam panel and slot over a pin on the top of the rad frame?

 

08mckerp

New Member

• Aug 9, 2010

• #5

err mine has 2 pins top and bottom. just sits to high by a couple of inches

 

08mckerp

New Member

• Aug 9, 2010

• #6

the 2 bottom ones mount on the chassis and the 2 top pins are held by brackets from the wing tops

 

wiltshire landyman

I’m back

• Aug 9, 2010

• #7

08mckerp said:

err mine has 2 pins top and bottom. just sits to high by a couple of inches

Click to expand...

most do..my brackets come of the slam panel not the wings tho

 

08mckerp

New Member

• Aug 9, 2010

• #8

ah that could be wher the issue is!