i know bad innit-cheap as though.They were 20 sheets-if they break ill buy some more!
Ours at work are £50 cost!!! buggerthat
...I normally ask for Pete @ Paddocks, he's half intelligent!
 
i ask for nobody as i don't deal with them...... i popped down to maldon to get my outriggers today........ £30 and some pence for a pair
 
i ask for nobody as i don't deal with them...... i popped down to maldon to get my outriggers today........ £30 and some pants for a pair

wuz they freshly worn pants or clean uns? :p
 
Damn & Blast :)
 

Attachments

  • IMG00329-20100826-1107.jpg
    IMG00329-20100826-1107.jpg
    236.4 KB · Views: 313
  • IMG00330-20100826-1236.jpg
    IMG00330-20100826-1236.jpg
    242 KB · Views: 332
Glad u are all happy with ur purchase,
I took my youngest to buy my Landy and just as I was about to start the haggle he said ' Dad you have got to buy this truck it's Lush' An expensive mistake, couldn't let him down.
 
Glad u are all happy with ur purchase,
I took my youngest to buy my Landy and just as I was about to start the haggle he said ' Dad you have got to buy this truck it's Lush' An expensive mistake, couldn't let him down.


And that's why children shud be seen but never heard!! :rolleyes: hope ya kicked him round the house when ya got him home. :D
 
Today I put the first coat of paint on the chassis...next Saturday we'll be cutting it for fitting :)
 
time for bed methinks...
 

Attachments

  • IMG00015-20100904-1232.jpg
    IMG00015-20100904-1232.jpg
    245 KB · Views: 335
  • IMG00016-20100904-1238.jpg
    IMG00016-20100904-1238.jpg
    245.5 KB · Views: 313
  • IMG00017-20100904-1505.jpg
    IMG00017-20100904-1505.jpg
    242.1 KB · Views: 285
one happy bunny ... everything from now is a whole lot easier :)
 

Attachments

  • IMG00018-20100905-1123.jpg
    IMG00018-20100905-1123.jpg
    249.7 KB · Views: 285
  • IMG00019-20100905-1243.jpg
    IMG00019-20100905-1243.jpg
    252.4 KB · Views: 265
This weekend...
*
Fabb'd second row inner sills & brackets & welded them on. Loosely fitted body crossmember.
Stripped all front lights off ready for new ones.
Refitted the fuel tank, managed to jump start it with a battery off a Nissan Micra!
Next week is fabricating the door shuts at the front of the tub, fitting tub braces, test fit the tub & put the exhaust on.
*
Pics to follow...
*
Still to do...
*
Drivers front outrigger, footwell repair sections, lots of wiring!, tyres, brakes, front diff, paint/retrim inside, door locks....Mot'd, taxed, insured by Christmas Day??? Hope so, otherwise I'll have to find her another present!
 
Today...
Fuel tank on properly with sender & pipe, insulated loom, roll bar back on & bump stops & new battery...opened the box with the footwells & tub braces in :)
Fitting braces tomorrow & maybe exhaust if there's time.
 

Attachments

  • IMG00079-20101016-1357.jpg
    IMG00079-20101016-1357.jpg
    244.2 KB · Views: 272
  • IMG00082-20101016-1358.jpg
    IMG00082-20101016-1358.jpg
    234.4 KB · Views: 243
  • IMG00081-20101016-1357.jpg
    IMG00081-20101016-1357.jpg
    265.9 KB · Views: 247
  • IMG00080-20101016-1357.jpg
    IMG00080-20101016-1357.jpg
    262.9 KB · Views: 268
Well the tub fit went well, all lines up lovely....just need to fabricate the angles for the rear door shuts,cut a new floor from some ally sheeting & re-route the loom & fuel line as they catch on the tub.
Exhaust is great, except the restored back pressure has blown a hole in the front pipe! BUGGER!
Oh & the dipstick tube is split-BIG LEAK & the front crank seal looks like its leaking!!
I can do most things but changing engine bits int my forte!
 
Dipstick oil tube replacement is very simple, undo it, replace it, simples.

Crankshaft seal is a tad different, but not too difficult, plenty of posts relating to it, just search under ' timing belt replacement ' as most people replace the cam & crank seals at the same time.
 

Similar threads