Could we compromise on 1 pasty split into required portions? Postage could
Mount up but a lot easier to post compared to the Scrumpy?
 
VIN number is readable with a Nanocom even if BECM is locked. FOB code and EKA code are readable IF BECM is unlocked, but not if it is locked. Only thing that can unlock a locked BECM is Faultmate MS2 with special and very expensive software.
 
wammers said:
VIN number is readable with a Nanocom even if BECM is locked. FOB code and EKA code are readable IF BECM is unlocked, but not if it is locked. Only thing that can unlock a locked BECM is Faultmate MS2 with special and very expensive software.
Click to expand...

Not that I need to now as sent the BECM to Rick but I was asking the workshop at LR if they could extract the VIN for the non original BECM in the car so I could order the correct Fob for it. I was told on Monday there was nothing could be done to help me, hence my frustrations!
 
i would ring the general manager back and ask him WHY the landrover dedicated T4 diagnostic system wont read the b.e.c.m. from a changed one in the vechicle i.e. be.c.m.s get changed in many different landrovers due to different circumstances , i.e. waterlogged !! fried !! corruption !! failure !!!! etc etc etc , there takling a load of sh***e ,they need to sack the idiot who told you that !!!!!! cheers keith ,,, mozz and wammers is right again ,,i.e. nano or faultmate , and unfortunately theres none about near you down in sunny somerset ,, or none on international register that is ........ in any case you should be back on road very quickly now !!!!!!!!!
 
mozz smith said:
i would ring the general manager back and ask him WHY the landrover dedicated T4 diagnostic system wont read the b.e.c.m. from a changed one in the vechicle i.e. be.c.m.s get changed in many different landrovers due to different circumstances , i.e. waterlogged !! fried !! corruption !! failure !!!! etc etc etc , there takling a load of sh***e ,they need to sack the idiot who told you that !!!!!! cheers keith ,,, mozz and wammers is right again ,,i.e. nano or faultmate , and unfortunately theres none about near you down in sunny somerset ,, or none on international register that is ........ in any case you should be back on road very quickly now !!!!!!!!!
Click to expand...

I'll be passing through with mine in a week or so but I'll have the missus and the mother-in-law with me. Think there's one near St. Austell if he fancies a drive.
 
Grrrrrr said:
I'll be passing through with mine in a week or so but I'll have the missus and the mother-in-law with me. Think there's one near St. Austell if he fancies a drive.
Click to expand...


Thanks All all being well shouldn't need it once the BECM comes back from Rick. Will let you know
 
If you are passing through and have EAS o wouldn't mind a test drive may spur me on to get bags as never tried it. So long as your happy to split a pasty though?
 
PastyMuncher83 said:
If you are passing through and have EAS o wouldn't mind a test drive may spur me on to get bags as never tried it. So long as your happy to split a pasty though?
Click to expand...

Would do for certain if I was on my own. I need to guage the mood and tiredness of the little one first. Depending how things go we may stop at that steam preservation line that goes up to Minehead. Mine's the diesel and nowhere near as smooth as the 4.6 IMO.
 
You must log in or register to reply here.

Similar threads

MrGorsky
P38A Occasional "Engine Disabled Press Remote" message on dash.
Replies
19
Views
1K
Datatek
Datatek
P38 guy
P38A Aftermarket remote
Replies
1
Views
373
pwood999
pwood999
feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
943
pwood999
pwood999
I
L322 how to re-write genuine key
Replies
0
Views
714
isamyku
I
I
P38 BeCM locked?
Replies
8
Views
650
pwood999
pwood999