Nialox
Active Member
Rear Tailgate Release Button pulled apart at lunch. No particular sign of major water ingress. In fact I would say probably on the better side. Cleaned, greased and installed again working well.
Moving onto front. First port of call is the non bloke who changed the latch last time ripped the soundproofing out on that side and broke a load of clips!! Speaker wire also broken into connector so quickly crimped a new one and good to go.
Door latch on initial inspection looks good. Very good looking. Plug clean with no corrosion or signs of evil demons.
Rod could well be bent however moved very freely and doesn’t catch at any point in range of motion.
put it all back together lubed up and no issues on first drive round block. Then again It wasn’t constant anyway.
will order clips before I take door card off again. And will wait to see if it returns at which point I’ll whip the bugger out and take a look on the bench.
One weird thing I’ve noticed. Central locking off the fob is flawless but never works at petrol stations?!
Moving onto front. First port of call is the non bloke who changed the latch last time ripped the soundproofing out on that side and broke a load of clips!! Speaker wire also broken into connector so quickly crimped a new one and good to go.
Door latch on initial inspection looks good. Very good looking. Plug clean with no corrosion or signs of evil demons.
Rod could well be bent however moved very freely and doesn’t catch at any point in range of motion.
put it all back together lubed up and no issues on first drive round block. Then again It wasn’t constant anyway.
will order clips before I take door card off again. And will wait to see if it returns at which point I’ll whip the bugger out and take a look on the bench.
One weird thing I’ve noticed. Central locking off the fob is flawless but never works at petrol stations?!