1

1251noel

New Member

• Dec 22, 2013

• #1

My P38 ABS light is on & when I press the brake the traction control light comes on, I have fitted 4 new wheel sensors, do I have to reset anything.

 

doz

Active Member

• Dec 22, 2013

• #2

How about getting it plugged in so you can see what the actual fault code is? Better than just trying to swap bits about.

 

1

1251noel

New Member

• Dec 22, 2013

• #3

was told by a garage that plug it in the most likely problem would be sensors, have got my own scanner now. Where do I plug the scanner in ?

 

owl

Well-Known Member

• Dec 22, 2013

• #4

The plug is in the passenger footwell

 

doz

Active Member

• Dec 22, 2013

• #5

Remember P38's aren't OBD 2 compliant on most systems. If you have a generic scanner it's probably not going to work with your car.

 

1

1251noel

New Member

• Dec 22, 2013

• #6

My P38 DHSE is a 2000 on an X. I have looked in the passenger foot-well & removed the kick panel but cant see anywhere to pug a scanner in, is it up behind the glove box ?

 

dogsbody

Very senior member

• Dec 22, 2013

• #7

1251noel said:

My P38 DHSE is a 2000 on an X. I have looked in the passenger foot-well & removed the kick panel but cant see anywhere to pug a scanner in, is it up behind the glove box ?

Click to expand...

Underneath the glove box.

 

gemsdad

NOT BOTHERED.

• Dec 23, 2013

• #8

1251noel said:

My P38 DHSE is a 2000 on an X. I have looked in the passenger foot-well & removed the kick panel but cant see anywhere to pug a scanner in, is it up behind the glove box ?

Click to expand...

what type of scanner is it that you are using???