M

mrelectric

New Member
Hi, my 1996 2.5 DSE RR gearbox lost drive, its a ZF4HP22 No 1043 010 728
are all ZF4HP22 RR gearboxes compatable with mine.
the gearbox has drive when cold but it goes again when car gets hot.
any ideas or compatable boxes:D:D:D
 
I believe the box is zf4hp24eh..

Just get a used one from a reputable place, or better still, get a zf4hp24 late model and slot it in place....
 
langley said:
I believe the box is zf4hp24eh..

Just get a used one from a reputable place, or better still, get a zf4hp24 late model and slot it in place....
Click to expand...

I may be wrong but wasn't the 24 the uprated one fitted to the 4.6, with the 22 fitted as standard to the Diesel and the 4.0 petrol?
 
Indeed, it is.

An if you do some searching you will get all the details needed to have a uprated transmission in place.

Or get a good refurbed gearbox.. Be wary of used boxes that arent refurbed..
 
langley said:
I believe the box is zf4hp24eh..

Just get a used one from a reputable place, or better still, get a zf4hp24 late model and slot it in place....
Click to expand...
First off, check the oil level, then drain a little off and look at the colour, black/burnt looking,box is probably toast, cherry red could be other things.
The ZF4HP24 was only ever fitted to the 4.6 V8 but the later 065 version is a straight swap for the HP22, you just swap the bell housing and use the diesel torque convertor. That's assuming your box is shot.
Only a box from a P38 is suitable without a lot of hassle.
 
drained some off its more like light red and clean, don't smell burnt in fact its same colour as the atf from new tin.
oil level was ok. my box is 4HP22, model 1043-010-728. can I use any range rover 4HP22 box with a torque converter
 
mrelectric said:
drained some off its more like light red and clean, don't smell burnt in fact its same colour as the atf from new tin.
oil level was ok. my box is 4HP22, model 1043-010-728. can I use any range rover 4HP22 box with a torque converter
Click to expand...

Any P38, but think about fitting a ZF4HP24, can be found on Ebay for between 100 and 250 pounds:)
 
Thanks Datatek !!
I was told that a ZF4HP24 wont fit on the 2.5 diesel dse. is there something I don't know. the ZF4HP24 is a better box but what will I need to fit it to mine as there are lots of HP24s on ebay
 
thanks JotaPê
yes I read that, very interesting too. do you have any idea what the diesel tailend housing is because I don't have a clue, cant find a 065 box nowhere but plenty early ones with 061 and 064. is this diesel tailend housing easy to fit, anyone got any ideas. pictures would be great
thanks
 
Datatek said:
Any P38, but think about fitting a ZF4HP24, can be found on Ebay for between 100 and 250 pounds:)
Click to expand...
thanks for all the info. managed to get a hp24 030-065 off ebay 76k on it £180 delivered....mandjlandroversalvage2012 in Salford, thanks again your the man
 
You must log in or register to reply here.

Similar threads

feyniriel
Gearbox fault P38?
Replies
3
Views
806
Grrrrrr
Grrrrrr
S
2001 range rover p38 auto gear dox issues
Replies
2
Views
989
kermit_rr
kermit_rr
KiwiTDI
Disco 1 Torque converter lock up clutch “slipping” after lock up
Replies
3
Views
204
KiwiTDI
KiwiTDI
J
P38 DSE Auto intermittent lack of power after vehicle has been hot
Replies
8
Views
447
brianp38dse
brianp38dse
Louis2.5DSE
P38A P38 DSE fires but won't start
2 3
Replies
58
Views
5K
BDC
B