Cooked or uncooked?Use a hotdog and film it for us
Grrrrrr
Technician, Bodgit & Scarper Ltd
You don't wedge it. You very slowly and gently touch the edge of the blades. If hot it will make a nasty noise and try to shred it. If warm it will slowly come to a stop.
RangeRoller dt
Well-Sprung Member
The pic we wanna see is the look on the amblumance drivers face as you try explaining how it got to this point
Grrrrrr
Technician, Bodgit & Scarper Ltd
And then he has to change his username to Stumpy?
Where the hell is this going 
RangeRoller dt
Well-Sprung Member
And why are your underpants covered in mustard again sir?β¦.
In all seriousness Iβm unsure he knows what the hell we are on about how to check a vcu, but Iβm with grrr in that itβs an E36 version or similar, which may not be as appropriate anyhow. If there are issues and he has AC id probably go with the Datatek mod if I were him.
In all seriousness Iβm unsure he knows what the hell we are on about how to check a vcu, but Iβm with grrr in that itβs an E36 version or similar, which may not be as appropriate anyhow. If there are issues and he has AC id probably go with the Datatek mod if I were him.
RangeRoller dt
Well-Sprung Member
The fulcrum tensioner? Largish screwdriver maybe - be gentle they can snap- trick is slow steady -straight (no twisting) - pressure then the elbow will release without wangling it. Snap that whole world of trouble
When you get the belt off check the idler pulleys by turning them by hand. Should be free with no grinding or excessive play
When you get the belt off check the idler pulleys by turning them by hand. Should be free with no grinding or excessive play
Last edited:
