Mr Noisy
Coming in your ears.
Here you will find my Megasquirt build thread, I'm hosting it on LR4x4 because they have a dedicated Megasquirt forum, although updates will probably slip through the net to here knowing me...
Sam's 3.5 Disco MEGASQUIRT START/FINISH INSTALL THREAD!- MS-Megasquirt/Jolt - LR4x4 - The Land Rover Forum
Seriously recommend this thread if you are interested in MS, beware tis very pic heavy!!
Looking good, Sam. Very nice to see the amount of help you're getting, not too often you see that these days ... 'cept on LZ of course ..
Posted here 'cos I don't want to mess up the thread of help you're getting 'over there'.
Posted here 'cos I don't want to mess up the thread of help you're getting 'over there'.
Hybrid From Hell
New Member
those blue boxes make me think of britpart
HAHAHA - Er "Non" Nothing "****part" ever comes near me !
The boxes were bought as a HUGE job lot from a Packaging company local to me who had a special order only to find the DAY they came in the company who ordered them had gone bust and he was stuck with them
I had to buy THE F LOT ! and its still filling a huge chunk of my workshop, but it means I can seperate the kits into more sensible boxes and write on them to help customers identify etc, and its better than a HUGE Box just filled with the kit !
****part - Nope, think more of them as "Blue" like the water you can go deep wading in
Nige
Mr Noisy
Coming in your ears.
Looking good, Sam. Very nice to see the amount of help you're getting, not too often you see that these days ... 'cept on LZ of course ..
Posted here 'cos I don't want to mess up the thread of help you're getting 'over there'.
nice one paul, yeah getting there slowly, monster of a job so far!
awesome help though from the MS boys, very pleased/relieved that its got such a following on LR4x4 else id be fooked!
Mr Noisy
Coming in your ears.
oh yes....ooooooh yes
I've always fancied doing this myself, so will enjoy this one Sam
would wholeheartedly recommend it joe and ive not even turned the key yet!
fett
Well-Known Member
HAHAHA - Er "Non" Nothing "****part" ever comes near me !
The boxes were bought as a HUGE job lot from a Packaging company local to me who had a special order only to find the DAY they came in the company who ordered them had gone bust and he was stuck with them
I had to buy THE F LOT ! and its still filling a huge chunk of my workshop, but it means I can seperate the kits into more sensible boxes and write on them to help customers identify etc, and its better than a HUGE Box just filled with the kit !
****part - Nope, think more of them as "Blue" like the water you can go deep wading in
Nige
So you are mr megasquirt?
Mr Noisy
Coming in your ears.
Mr Noisy
Coming in your ears.
joe1972
Well-Known Member
Fookin A* matey!!!
brill stuff:5bhurray::5bcheers2:
discomark10
Well-Known Member
Wehay!!! Nice one fella! Now get tuning!
joe1972
Well-Known Member
would wholeheartedly recommend it joe and ive not even turned the key yet!
I got a rare dizzy/coil set from the ex MOD auctions a while back, which I STILL need to get round to fitting. Once that's jiggered/ realise it doesn't work in water, or I've written off another engine, I'll probs go the Megasquirt route....one day
Hybrid From Hell
New Member
^^^
That wil be a RF SAS supression Kit, its a sheilded Dizzt ca unit and a coil cover ? with some natty plaited leads ?
If so then it offers a definate improvement over anything else, and helps with "Splash" proofing vs Deep bonnet under wading etc or being undr bonnet and stationary. If you can have a bow wave and keep the unit down to being spalshed then it helps one hell of a lot, I tried one years back, big improvment, erm I just found that when I killed it with too much water I was then in even more trouble than I was before I fitted it !
Depends on what your planning to do, but yes next to megasquirt its about as good as you'll get, adding a 1 litre "Plastic Bottle" and zippy tieing it over the cap will help more still.
It is a RF supression set, but it does have a side efeect of improving warer resistence
However if is a Distributor itself, beware if its a 101 as the advance curve and maz adavnce is cmpletely different to a High Comp V8
Nige
That wil be a RF SAS supression Kit, its a sheilded Dizzt ca unit and a coil cover ? with some natty plaited leads ?
If so then it offers a definate improvement over anything else, and helps with "Splash" proofing vs Deep bonnet under wading etc or being undr bonnet and stationary. If you can have a bow wave and keep the unit down to being spalshed then it helps one hell of a lot, I tried one years back, big improvment, erm I just found that when I killed it with too much water I was then in even more trouble than I was before I fitted it !
Depends on what your planning to do, but yes next to megasquirt its about as good as you'll get, adding a 1 litre "Plastic Bottle" and zippy tieing it over the cap will help more still.
It is a RF supression set, but it does have a side efeect of improving warer resistence
However if is a Distributor itself, beware if its a 101 as the advance curve and maz adavnce is cmpletely different to a High Comp V8
Nige
