Lyndon · Jan 14, 2011

Im guessing landrover didn't do this from factory so anyone have any ideas of what happened here?

as im posting photos any idea if the oil leak (from the bolt next to filler cap) in picture 3 is serious?

Thanks again everyone! one day i may be able to answer your questions

J.P.S · Jan 14, 2011

Lyndon said:
Im guessing landrover didn't do this from factory so anyone have any ideas of what happened here?

as im posting photos any idea if the oil leak (from the bolt next to filler cap) in picture 3 is serious?

Thanks again everyone! one day i may be able to answer your questions

The pipe is for the vacuum on the servo, the pipe from the t-piece not sure where it goes but possibly to the heater controls to activate flaps n things in the heater box!! im sure someone else can be a bit better in their description lol

The oil leak is easily fixed by putting a new rocker cover bolt seal in, pennies i would have thought!!

Lyndon · Jan 14, 2011

great cheers, i was worried incase it was suposed to be letting something breath and it had a plug in it!

bruvjon · Jan 14, 2011

If it has cruise control properly the pipe that went to brake switch

Richard Martin · Jan 14, 2011

I think the bolt is where the vacuum pipe for the EGR control valve solonoid thing was. there is another post on here not far away asking about some pipes under where the chock and jack sit nearside front. This is the other end of one of them.

And as J.P.S says the sealing washers for the rocker cover bolts are easy and cheap to replace

jonathanp · Jan 15, 2011

The pipe with the bolt should go to the brake pedal . It is for cruise control . Regards Jonathan

Lyndon

Active Member

Attachments

J.P.S

Active Member

Lyndon

Active Member

bruvjon

New Member

Richard Martin

Well-Known Member

jonathanp

Active Member

Similar threads