oldskool · Feb 21, 2015

Well been fiddling with my new disco

, got it last week is a bit poorly was sitting down on one side (air bag) had a couple of good second hand ones so now all good.

Running poorly so first thing new plugs very little improvement, so leads and coil packs next FFS that could have been better thought out by designers.

Now idles better but still not happy revving, no more codes showing having cleared all the misfire one's, so disconnect MAF aaahhhhh thats seems a lot better revs a lot cleaner stopped popping back through inlet ect.

time for a road test.

Does any one here know what readings the MAF should be giving at idle ect.???

Any way seems ok but soon starts holding back as soon as any power is asked for

Some pics to follow

oldskool · Feb 21, 2015

Pics as promised

oldskool · Feb 21, 2015

And some more hopefully

oldskool · Feb 21, 2015

No that didn't work properly

kin putters

biggeeeee · Feb 21, 2015

oldskool said:
Pics as promised

Sweet!

oldskool said:
No that didn't work properly kin putters

Thats it blame the computer, oxygen thief!

oldskool · Feb 21, 2015

And again fingers crossed

biggeeeee · Feb 21, 2015

oldskool said:
And again fingers crossed

Better, when I bought mine I tried in vain to get one that colour, but had no joy and went for the dark blue.

oldskool · Feb 21, 2015

I prefer the blue but beggars can't be choosers

wasn't actually looking to buy one but saw it and thought wot the hell looked ok in the picks

biggeeeee · Feb 21, 2015

oldskool said:
I prefer the blue but beggars can't be choosers wasn't actually looking to buy one but saw it and thought wot the hell looked ok in the picks

Good choice, I've had mine 10 years now and really don't have any plans to change it

Littelwill · Feb 21, 2015

Looks really smart on those alloys! well done

oldskool · Feb 21, 2015

Littelwill said:
Looks really smart on those alloys! well done

It didn't come with them

ive had them in my workshop for ages there my D1 summer wheels

oldskool · Feb 25, 2015

Little update, after fitting coil packs and leads last week which fixed the misfire but it still wouldnt rev, new MAF turned up today and all's good now.
Took it for a quick road test all was well until until it ran out of fuel as i floored it out of a mini roundabout

biggeeeee · Feb 25, 2015

The HSE models come with a fuel gauge:doh::lol:

oldskool · Feb 25, 2015

biggeeeee said:
The HSE models come with a fuel gauge:doh::lol:

Smart arse

gauge would appear to be a little inaccurate.

It did restart and drove ok untill i turned into workshop and it cut out again

fecking steerings heaving when engine stops

oldskool · Mar 2, 2015

Ok little update on the disco, when i bought it in the advert it said exhaust fallen off it in boot? ok thought it was probably the rear silencer no probs, oh no it was the front pipes?? cant see them falling off

However there were a couple of broken studs so a bit of heat and some rust penetrant turbo socket and they both came out

Had a bit of bother getting the two cross members off but again rust penetrant and a turbo socket and got them all out

So thought give it a service, took sump plug out nothing

i know it had oil init cos i put some in when i first got it cos oil light was flickering .
So stuck a screw driver in and some thick grease like muck came out (this was a warm engine anorl

oldskool · Mar 2, 2015

Here's a pick of the oil trying to get out of the sump, have flushed sump with new oil and some oil treatment 3 times and there is still some gooey sludge coming out, will be doing a couple more oil changes this week to try and the rest out.

oldskool · Mar 2, 2015

Bugger

oldskool · Mar 2, 2015

Next job A/C not working so regassed it was expecting the worst as i have already A/C pipes off (coil pack change) and there was no gas in system at all.

However it vac'd out fine held vac with no signs of a leak

recharged with gas and away it went ice cold result

This is the temp coming out of the passengers side vent that'll do

oldskool · Mar 3, 2015

Quick question, does any one know if the leather seat base covers are handed?
Fanks in advance

oldskool · Mar 5, 2015

Another quick update, had a bit of a clunking going on when drive/reverse were selected, found a front propshaft U/J had seen better days

So set about changing them, (had already ordered replacements) well i've never done a double cardan type before that was interesting how it works (if your a sad spanner wa£$%$er like me) but all done and now no clunking, result, another job ticked of the list

Done another oil change anorl, oil still coming out black and a bit lumpy but getting better.

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Retired - Living the dream

Well-Known Member

Attachments

Retired - Living the dream

Well-Known Member

Retired - Living the dream

Well-Known Member

Well-Known Member

Well-Known Member

Retired - Living the dream

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Attachments

Similar threads