Turboman · Dec 11, 2018

An unused Pressbrake 6mm steel crossmember.
I bought this one about ten years ago, when word went around that he was stopping producing them. I gave it 2 primer coats and a coat of black enamel, and it has been stored ever since.
An extremely good quality item, welding is excellent, and no box section, so it can be pressure washed out.
There is some minor paint damage from storage and transport, otherwise perfect condition.
£200 will secure, PM for mobile number.

Turboman · Dec 11, 2018

And the extensions.

Turboman · Dec 17, 2018

Surprised this bargain hasn't been snapped up yet, Devon 4x4 do one similar, but 5mm, for £370.

Might help if I add that the crossmember can be viewed and collected from March, Cambs.

Ideal Christmas present for the Landrover lover in your life. Assuming they have a rusty crossmember, of course!

Kwakerman · Dec 18, 2018

Turboman said:
Surprised this bargain hasn't been snapped up yet, Devon 4x4 do one similar, but 5mm, for £370.

Might help if I add that the crossmember can be viewed and collected from March, Cambs.

Ideal Chritmas present for the Landrover lover in your life. Assuming they have a rusty crossmember, of course!

Not that I need one as I have one of Clive's on mine already but just wondering if it is worth tracing the shape of the extensions out for anyone that may want to make repair patches in the future?

Turboman · Dec 19, 2018

Kwakerman said:
Not that I need one as I have one of Clive's on mine already but just wondering if it is worth tracing the shape of the extensions out for anyone that may want to make repair patches in the future?

Not a bad idea, although I personally have no intention of getting another Land Rover, which is why I am selling the crossmember.

And thanks for calling my attention to the fact that I had missed the s out of Christmas, now edited!

mick the builder · Dec 20, 2018

I think not many people think of looking here. Post a little teaser in the defender 90/110 section. If i was close by. id buy it .

Turboman · Dec 20, 2018

mick the builder said:
I think not many people think of looking here. Post a little teaser in the defender 90/110 section. If i was close by. id buy it .

Not a bad idea either, and I might try it if it hangs on for a very long time. But I am not in a desperate hurry, and it is up to 186 views now, so we will see how it goes.

Hicap phill · Dec 20, 2018

Convert it to a shelf with a nice bit of wood.
Some hipster would snap it up

Turboman · Dec 20, 2018

Hicap phill said:
Convert it to a shelf with a nice bit of wood.
Some hipster would snap it up

@NorfolkBird would probably snap it up, but then I wouldn't get the money!

NorfolkBird · Dec 20, 2018

Turboman said:
@NorfolkBird would probably snap it up, but then I wouldn't get the money!

Turn it into a nesting box and I might be interested

freelance · Dec 20, 2018

Turboman said:
@NorfolkBird would probably snap it up, but then I wouldn't get the money!

That’s solved one Christmas present !!

Turboman · Jan 8, 2019

Still hoping to move this on in the near future. It is taking up a decent space in the container, and I really don't want to move it again.

At this time, this quality product is marketed exclusively on LZ, but there will come a time when it will have to go on Fenlanders, ebay, and such other lower quality marketplaces.

LiftedDisco · Jan 9, 2019

I know that Clive has committed to a batch of steel that has been cut to size but doesn’t have his old jigs and is currently looking for a crossmember for templating purposes...

This could be just what he’s after!

Turboman · Jan 10, 2019

LiftedDisco said:
I know that Clive has committed to a batch of steel that has been cut to size but doesn’t have his old jigs and is currently looking for a crossmember for templating purposes...

This could be just what he’s after!

It isn't. He has already said that he wants an old crossmember off a scrap vehicle.

Turboman · Feb 16, 2019

Still not sold this. Anyone in need of an excellent replacement crossmember, drop me a pm.

Turboman · Apr 8, 2019

Had a few sniffs at this, but still nobody has put the cash in my hand.

Try again. The weather has improved, so perfect conditions for welding on crossmembers!

nobber · Apr 13, 2019

If I wasn't up to my neck (and wallet) in repairs Id snap this up off you. Even to keep in the shed as a spare if and when.

Turboman · Apr 13, 2019

nobber said:
If I wasn't up to my neck (and wallet) in repairs Id snap this up off you. Even to keep in the shed as a spare if and when.

That was why I bought it, but my crossmember lasted better than I thought.

Might do a deal, seeing as it is you. PM me, I will send you my number if you want to come and have a look. I have a few other Landrover bits you might be interested in too.

About an hours drive from you, if you wait until after the Easter holiday traffic is gone.

pressbrake · Apr 14, 2019

Put it on face book, I hope you get the asking price which was more than I sold them for, might spur me into action

Turboman · Apr 15, 2019

pressbrake said:
Put it on face book, I hope you get the asking price which was more than I sold them for, might spur me into action

I am not on facebook, and not that desperate to sell it.
I can't remember what you sold it for, it was about ten years ago.
I suggested that price because Devon 4x4 sell one that doesn't look as good for £370.
I would be happy to negotiate on the price, but so far, nobody has even messaged me about it.

Mab An Gov

Mab An Gov

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Well-Known Member

Mab An Gov

Member

Mab An Gov

Mab An Gov

Mab An Gov

Well-Known Member

Mab An Gov

Well-Known Member

Mab An Gov

Similar threads