Well I'll hope it is for nowcant afford a full rebuild
well i don't suppose you can, now you've bought those silly shocks
Dr_evil
Banned
well i don't suppose you can, now you've bought those awesome shocks
I needed some
my old ones were ****ed and completely rusted
Found a new engine I might get
4.2L dont = 462 cu in
Dr_evil
Banned
Well I changed the thermostat and tested it in 100*c water, thermostat opened about 2mm so thats a lot less than my waxstat one in the same temp water. Hoping that helps to keep it a bit cooler.
Would have run it but the battery is buggered now so thats next on my list of stuff I have to buy.
also;
Got some mates to help me fit the body back on, however it would appear that the fuel tank is too high up now so next job is to replace the bolts with longer rear ones in order to drop it down an inch. Just means for now the rear body is a little up off the top of the rear crossmember by about half an inch.
Front ones are original so they're the right height
Would have run it but the battery is buggered now so thats next on my list of stuff I have to buy.
also;
Got some mates to help me fit the body back on, however it would appear that the fuel tank is too high up now so next job is to replace the bolts with longer rear ones in order to drop it down an inch. Just means for now the rear body is a little up off the top of the rear crossmember by about half an inch.
Front ones are original so they're the right height
piston-return-spring
New Member
WOw , you have made good progress , cant wait to see the result with its body on ^^
Dr_evil
Banned
Thanks mate, hoping to have it back together next weekend, waxoyl the chassis and finally get round to chemical metaling the inner bulkhead. Was going to do that today but getting the body on took a while.
On another negative note I realised I welded on the windscreen mounts slightly off their
designated spot so I'm going to have to grind them off and re-weld too :doh::doh::doh::doh:
Then all I need to worry about is that damn engine if the thermostat doesnt fix my problem
On another negative note I realised I welded on the windscreen mounts slightly off their
designated spot so I'm going to have to grind them off and re-weld too :doh::doh::doh::doh:
Then all I need to worry about is that damn engine if the thermostat doesnt fix my problem
Dr_evil
Banned
Well I managed to fire up the bugger today using a power pack
Stupid things still overheating or not……..gauge is definitely off as it went right up past the red zone, water pumps working cos I saw it pumping (had the cap off to get rid of any airlocks) and the water wasn't even boiling
Plus I could touch the engine block and it didn't burn my hand so it was defo under 100*
Only thing I noticed was that after it hit boiling point when I was running it to remove airlocks is that it seemed to create a scum on top of the water, not much but it was there although I think it was mainly bits of crap coming off the rad's insides as I don't think I flushed it out fully with the hose.
Stupid things still overheating or not……..gauge is definitely off as it went right up past the red zone, water pumps working cos I saw it pumping (had the cap off to get rid of any airlocks) and the water wasn't even boiling
Plus I could touch the engine block and it didn't burn my hand so it was defo under 100*
Only thing I noticed was that after it hit boiling point when I was running it to remove airlocks is that it seemed to create a scum on top of the water, not much but it was there although I think it was mainly bits of crap coming off the rad's insides as I don't think I flushed it out fully with the hose.
Dr_evil
Banned
Cheers 2A, I'm just going to fit it back together for now and then send it off to the local landrover repair shop (not LR themselves)
Been quoted £274 or thereabouts for a new headgasket and engine clean up (more if skimming is needed)
But hoping that it's simply the rad, got 2 pics to upload later as I'm not at home so don't have my laptop
Been quoted £274 or thereabouts for a new headgasket and engine clean up (more if skimming is needed)
But hoping that it's simply the rad, got 2 pics to upload later as I'm not at home so don't have my laptop
Dr_evil
Banned
Yep, checked all hoses
There was a white scum on the top of the water after I brought it up to boiling point without the cap on which I put down to the crap left in the rad being dislodged but if not then that could be HGF related, water flow looked slow too though as it was more of a trickle coming out rather than a torrent which wasn't what I was expecting
Going to have a word with the shop tomorrow about them collecting it next week or the one after when I go in to get my windscreen mount
There was a white scum on the top of the water after I brought it up to boiling point without the cap on which I put down to the crap left in the rad being dislodged but if not then that could be HGF related, water flow looked slow too though as it was more of a trickle coming out rather than a torrent which wasn't what I was expecting
Going to have a word with the shop tomorrow about them collecting it next week or the one after when I go in to get my windscreen mount
Dr_evil
Banned
Well it's coming together now, landrover spares are hopefully picking it up next week to fix the overheating problem and I've found an old SD1 engine for sale in town so hopefully I can pick that up
The white foam has disappeared as of today and it wasn't creamy it was just a white foam when it happened but heres some pics
Nearly there now
The white foam has disappeared as of today and it wasn't creamy it was just a white foam when it happened but heres some pics
Nearly there now
V8jon
Well-Known Member
looking good,the sd1 engines are good for 165 bhp, that's what I've got in mine and it goes like the clappers!
Dr_evil
Banned
looking good,the sd1 engines are good for 165 bhp, that's what I've got in mine and it goes like the clappers!
hahaha well mine weighs a bit more than yours so it needs all the help it can get!!!
I'm hoping that white foam isn't HGF as it disappeared yesterday when I looked into the rad so might not be
Probably going to buy the engine though if it's still for sale as it's always nice to have an abundant supply of spare parts
Dr_evil
Banned
Just bought him a new V8 from a Snatch, comes with service history and all the extra's plus the HD rad for an extra £10
Total = £410 next day delivered
So thats me skint, I'll be going down the scrappy to get me some Audi seats from the A8 they're breaking I think as I sold my bucket seats after realising they weren't going to be much use
Total = £410 next day delivered
So thats me skint, I'll be going down the scrappy to get me some Audi seats from the A8 they're breaking I think as I sold my bucket seats after realising they weren't going to be much use
