MayorQuimby
Active Member
Another thing to start selling...
Another thing to start selling...
Back panels in the tub.
Where did you get your back panels from, mate? Were they Britpart ones? Mine have been hard work and I think I am going to have to scrap the near side one. It's looking like I might have had it in the wrong place when I drilled the holes through from the inner wing. Would rather not buy the same poorly built panel again if there are better ones available.
I think they were from Ribble valley 4x4 on ebay mate, they weren't perfect and i had to do a little bit of trimming but nothing too bad and were pretty easy to fit. I had looked at the britpart one's and decided to leave them alone. I had to buy genuine corner post though as the one's from paddock didn't even meet the top capping they were 1/4" short and apparently i'm only the 3rd person to complain about them from the 1000s they have sold.
If only i had the time.
Managed to get one side done in between seeing to my wife's horse i will get the other done tonight.
I couldn't tell you what make they are but they were out in the same place as your's but only by 1/4" though.
They are very very nice mate. Seriously. If you were to sell those rock sliders and rear corner protectors you would make a fortune..
Take it down Hollinsclough in Derbyshire that lane will give you a reason to put them on.
Take it down Hollinsclough in Derbyshire that lane will give you a reason to put them on.
If you do start making them corner protectors put me down for a pair they really do look the mutts nutts
I'm already putting money aside for the rock sliders and corner protectors.
Just lengthen the sliders accordingly for a 110 and leave the corner protectors without the holes...