1

13E41V

Active Member

• Feb 21, 2013

• #1

brought my landrover 90 bout weekago drove home fine runs good just had a rusty bulkhead
thought id start striping it down 'wish i never started should of got the filler out...... dont want a bojd up landy tho so brought me a mint bulkhead of ebay got the hastle of changeing it all over
thought while i was at it take tub of and jet wash chassis wire brush it and paint up as its in good conditon not done yet but will take some pics before and after of chassis next week this will be

heres some pics as ino you guys love them

 

Billy B

Well-Known Member

• Feb 21, 2013

• #2

Check the welds on the outriggers mine looked just like yours but had severe tin worm underneath, good luck keep the pics coming

 

1

13E41V

Active Member

• Feb 21, 2013

• #3

cheers for that i mite just replace it soon.

 

1

13E41V

Active Member

• Feb 21, 2013

• #4

p.s pic 3 thats my old man not me lool

 

L

Litch

Well-Known Member

• Feb 21, 2013

• #5

Amazing what you find needs doing when you have all that unrestricted access, make use of it to check the wiring, brake-pipes, hoses etc etc.
I recomend using SS fixings and plenty of Waxoil on reassembly, has proved to be an unbeatable combination over the years. Make sure the bulkhead is fully loaded with Waxoil before you fit it (turn it upside down, tape up all the holes and poor copious amounts of liquid Waxoil into it, allow it to stand for a while and then rotate it and allow the excess to drain out), you can then use the excess to brush every nut, bolt & washer before you fit them so that in years to come they all come undone with ease (been there & proved it).

 

1

13E41V

Active Member

• Feb 21, 2013

• #6

ino this goin to sound silly but wich waxoil do i buy and weres best to buy from ..i recently brought some zinc paint in a tin is that any good to use on chassis ?.

 

Dr_evil

Banned

• Feb 21, 2013

• #7

dinitrol

 

S

saccy

New Member

• Feb 22, 2013

• #8

Looking good there,just a bit on the ss nuts and bolts great plane but dont forget to use lock nuts or spring washers on them,they dont rust up like the old onces and rattle loose.

 

1

13E41V

Active Member

• Feb 22, 2013

• #9

yes most the nuts and bolts iv had to grinde out they were ****e...each day iv been ordering stainless nuts and bolts for when i rebuild think im going to be at it a while tho on my own .

 

matchmetisse

New Member

• Feb 22, 2013

• #10

Been at mine on and off for about 3 years now mate,trouble is when you start you dont want to put the old crap back on!

 

A

arc

Active Member

• Feb 22, 2013

• #11

matchmetisse said:

Been at mine on and off for about 3 years now mate,trouble is when you start you dont want to put the old crap back on!

Click to expand...

Ha- me too... 3yrs 10 months and 2 days so far...
Must resist the urge to buy more bits... Mot priority!

Keep the photos coming.

 

1

13E41V

Active Member

• Feb 22, 2013

• #12

verry true i dont want old stuff back on but looks like im going have to will clean it up paint arms axels ect but new bushes been orded new nuts and bolts going todo best as i can with the crap funds i have and out door with no garge is evan worse can onley hack it for so long before my toes and fingers drop off

 

matchmetisse

New Member

• Feb 22, 2013

• #13

It is nice rebuiling on a sunny day with lager to hand

 

CountJimmy

New Member

• Feb 22, 2013

• #14

This looks quite handy for spraying the inside of the chassis:

http://bit.ly/13tUpky

I'm not planning a full strip down, so looks a bit easier than tipping it inside the chassis! I don't want it to turn into a 3 year plus project!

 

puffin1

Active Member

• Feb 22, 2013

• #15

Yes i used that to spray the inside of my 90 and it worked , but you have to have the wax really warm. goof cheap way to do it got mine from Halfords .

 

1

13E41V

Active Member

• Mar 9, 2013

• #16

well fort i would update my project in no longer'' due to moveing house in 4 weeks and baby due in 6 but she seems like she could have it any time soon so have had to sell it ' i am gutted iv lost over 700 in less than 4 weeks. im hopeing soon as im sorted in new home with new born feww weeks after i will buy another but dont think ill be able to rebuild it to how i would like .

 

Dr_evil

Banned

• Mar 9, 2013

• #17

You sold it or scrapped it ?

 

aaronmorris

Head's a shed

• Mar 9, 2013

• #18

Dr_evil said:

You sold it or scrapped it ?

Click to expand...

Was on ebay the other day so guessing he sold it.

 

1

13E41V

Active Member

• Mar 9, 2013

• #19

yes sold 1st chap that called brought it minus the spare disco