robbh
Crazier than a box of frogs on acid
Well battleship grey is leading the poll atm
I quite like the look of grey body and black bonnet!
Yer i know
but i is got 5l of satin blackMight buy the grey anyway and paint it black and grey
Another pic i forgot to upload.
onecelledcreature
Active Member
Yer i know
Might buy the grey anyway and paint it black and grey
Another pic i forgot to upload.
mines grey and i really toyed with the idea of leaving my doortops black and then fitting a black canvas.
for me, solid black doesn't suit a series like it suits a defender, i think you need to keep it twotone if you do it black, and make sure the cappings stay silver
robbh
Crazier than a box of frogs on acid
Decided on two tone now. Just got to decide which bits to paint black etc.
Cappings will stay silver no matter what
robbh
Crazier than a box of frogs on acid
Well the 109 is certainly earning her keep tonight
Got a call a few hours ago from a friend of mine who got his gaylander stuck in a field next to a load of muck up their yard. He managed to get it bogged down so far you couldn't see the blingy sidesteps that are on it and could only just open the door.
Unfortunately didn't manage to take any photos as my phone was being used as a torch as it was pitch black. Hooked it up after a lot of digging, dropped the 109 into low and 2nd and it heaved it out no trouble at all
All in all a rather entertaining night and a good trip out in the 109
On another plus my friend is now gonna sell the gaylander and buy a proper landy
Got a call a few hours ago from a friend of mine who got his gaylander stuck in a field next to a load of muck up their yard. He managed to get it bogged down so far you couldn't see the blingy sidesteps that are on it and could only just open the door.
Unfortunately didn't manage to take any photos as my phone was being used as a torch as it was pitch black. Hooked it up after a lot of digging, dropped the 109 into low and 2nd and it heaved it out no trouble at all
All in all a rather entertaining night
and a good trip out in the 109 On another plus my friend is now gonna sell the gaylander and buy a proper landy
robbh
Crazier than a box of frogs on acid
Whats the point of your light bar if you wont use it?
I couldn't be arsed to turn it round as it was a rather tight space where he was stuck
The light bar works well though
robbh
Crazier than a box of frogs on acid
Rear leaf springs got a coating of a mixture of used oils and thinners today after a thorough wire brushing
Got a little fed up of the bone jarring ride so thought I'd get on with it
They will get another coat of the mixture tomorrow morning and also then fill her up with the shed load of scrap metal i have lying around followed by a trip the scrappy so hopefully will free them up nicely.
Front leaves will also get a coat tomorrow morning even though they work quite well.
Got a little fed up of the bone jarring ride so thought I'd get on with it
They will get another coat of the mixture tomorrow morning and also then fill her up with the shed load of scrap metal i have lying around followed by a trip the scrappy so hopefully will free them up nicely.
Front leaves will also get a coat tomorrow morning even though they work quite well.
robbh
Crazier than a box of frogs on acid
Another small update.
Finally made a bit of progress with the disco axles
Rear axle is now stripped of all it's coil sprung bits and bobs and is now ready for welding.
It's more rust free than in those pictures. Spent another hour or so after they were taken wire brushing and attacking it with a flap disc. Then had to rush to pack everything up as me dinner was ready Will get more pics once i start fabricating the leaf mounts, shock mounts and bump stops. Plus i ran out of cutting discs
More to follow over the next week or so
Finally made a bit of progress with the disco axles
Rear axle is now stripped of all it's coil sprung bits and bobs and is now ready for welding.
It's more rust free than in those pictures. Spent another hour or so after they were taken wire brushing and attacking it with a flap disc. Then had to rush to pack everything up as me dinner was ready
Will get more pics once i start fabricating the leaf mounts, shock mounts and bump stops. Plus i ran out of cutting discs More to follow over the next week or so
robbh
Crazier than a box of frogs on acid
Snigger
Nah I'm good...... Maybe....... But no
The 3.5 will have to do for now...
