turbominij
Active Member
ooo New toys what ya got
turbominij
Active Member
Iv eBay watched it too for when I get to the gearbox going to do my transfer box first and fit that then worry about doing my gearbox once I have a 1.4 back i cant live any longer with the 1.2 lol
aaronmorris
Head's a shed
I likes buying tools anorl 
How do you plan on fitting the oil seal collar? Or is that another tool you need to buy
How do you plan on fitting the oil seal collar? Or is that another tool you need to buy
jamesmartin
Well-Known Member
This set looks handy...
16 Piece Bearing Extractor Set Inner Internal Blind Remover Pilot Bushes puller | eBay
And time wise probably about cost neutral with driving over to my mates to weld out the pilot race....
And did I say I like getting new tools?
nice kit
turbominij
Active Member
I brought a eBay 20 ton press from a place in Rockford all I can say is it does what it says on the tin!!!!!! Cracking bit of kit buy one you won't regret it!!!!! I must use mine every other time I go to my workshop bearings seals flatten to odd bit of metal wouldn't be without it now interestingly it's identical to a sealy one I looked at bet it from the same place to start with
turbominij
Active Member
Wickford not Rockford. Here is the linkey http://bit.ly/10jU8PC
Bennehboy
Well-Known Member
Was looking at this one: 20 Ton Industrial Hydraulic Workshop/Garage/Shop Press NEW CT188 | eBay
The one you've got looks a bit more substantial though.
The one you've got looks a bit more substantial though.
turbominij
Active Member
Tbh it looks identical idsay I got mine prob 3 months ago and Couldent get it for less than I paid the 119 one has 35 delivery so is 155 we're as the one I got was 149 delivered and the company is only down the road to me so if it was crap I could go in and have a go at some one :-D
Orch
Active Member
Ooh now that looks a good find.
Bennehboy
Well-Known Member
I intend to collect, it's only 45 mins to an hour drive from me.
turbominij
Active Member
i brought mine to do wheel bearings on a renault scenic and bushes on my disco after doing them two jobs it paid for its self in savings on taking the bearing some where to get pressed out and the effort of hammering the bushes on my part. when i got mine i coupled it with these two and it does virtuly everything iv thrown at it.
450505 16pcs Car Truck Chuck Type Gear Bearing Splitter Separator Tool Set | eBay
with this make sure you get the steel ones not ali ones for use in the press
Sealey Bearing Race & Seal Driver Set 10pc - Steel VS7031 | eBay
450505 16pcs Car Truck Chuck Type Gear Bearing Splitter Separator Tool Set | eBay
with this make sure you get the steel ones not ali ones for use in the press
Sealey Bearing Race & Seal Driver Set 10pc - Steel VS7031 | eBay
turbominij
Active Member
well worth it then id go for that one too
Bennehboy
Well-Known Member
I've got the laser equivalent of the bearing separator.
Might have to invest in that driver set!
Last edited:
turbominij
Active Member
makes putting in seals and bushes races sooo easy with a lipped oil seal i used the old bearing race updide down on the seal then a apropreat sized bit from the driver set on top of that and press it in.
some are a little fiddly so using it by hand and a hammer on the end of the shalft is better but ul work it out
il warn u lo first time u use it you will nearly **** ur self from the bang as u take out ur first really stuck bearing!!! coor they dont half go with a BANG!!!
some are a little fiddly so using it by hand and a hammer on the end of the shalft is better but ul work it out
il warn u lo first time u use it you will nearly **** ur self from the bang as u take out ur first really stuck bearing!!! coor they dont half go with a BANG!!!
