MudHunter

Active Member

• Sep 17, 2011

• #1

After having the gearbox out n re connecting the wires for the diff lock light i found the light just stays on all the time. Wanted to check if the diff was locked or not so put the lever in unlocked, jacked up one corner tried to drive off and the wheel just spun. tried again with the lever in the locked position and it tried to drive away. SO i think my difflock is working correctly yes? just a spastic light?

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Sep 17, 2011

• #2

sounds like switch or adjustment

 

MudHunter

Active Member

• Sep 17, 2011

• #3

ye thats what i thought. cheers. just wanted to check to i dont end up a tranny. hang on that ent quite right.. dont wreck the tranny.

 

GRATCH

HUGE MEMBER

• Sep 18, 2011

• #4

Screw out the switch 1/2 turn at a time untill it works properly, or check you haven't trapped and shorted the wires somewhere.

 

wangie46

Active Member

• Sep 18, 2011

• #5

Ya need to unscew the switch a bit as it is wound in to much hence why it is staying on

 

MudHunter

Active Member

• Sep 18, 2011

• #6

cool will ave a go int morning.