No I didn't, I will do it at weekend. I've got a full week this week and I don't have the strength to do itMornin volks. Be rennin agen. Us boys tekkin car tu wurk this week an then sellin orrible ving.
Hey WL didja fix yer ball joint?
I have never picked a duck up and stroked it, I have just sometimes slept on feather pillows and/or under what we used to call an "eiderdown" which tells you what was in it. That was more or less as a kidSo your not allergic to dux doo ??
Weight and size would make a problem. Heavier balls would run further but take a bigger hit to get anywhere.Gottid me nooker table built. A make shift one with door seal foam stick on stuff as the cushion. Not going mad wivvit building it betterer until eye knows the mdf will stay straight. Eye has built it to propper nooker table speck for shape un size of pocket. Tis 8x4 foot. Was using 2 1/16 inch nooker balls but when changing too/from these to pool balls at 2 1/4 inch which are heavier it messed up me shots. Am no good burrit makes fungs worser. So eye bort some merkin size pool balls 2 1/4 inch to practice wiv. Eye were in a pool comp at wuk and me shots were all over the place some days. Especially if eye'd been practicing wiv me nooker balls at home day before. Fink it were because of changing between different balls. Weight un size seems to make a difference. And eye hassa dominant eye problem so need to prsctice cueing straight..
fort for a minute you had said "Islington".No was at Ingliston motor festival.
I must look into this, I'd do anything, almost, to drop two trews sizes.Morning All.
A shopping day.
NVM we have to eat.
I met a bloke on holiday who lost 40Kg when he went on the Carnivore diet.
Before I met him I was warned to expect a really fat bloke with a big spade beard.
What I saw was a taller rangey guy that was quite slim. He said he had been plagued with illness (headaches & gastric issues) all his life and now they were all gone and he felt great. Interesting, I thought.
Have a great day.
Change the size label - instant resultI must look into this, I'd do anything, almost, to drop two trews sizes.
Well, the only drawback I hear people who don't do it shout about is "possible kidney damage", but there's lots of contradictory stuff floating around. You tube is your friend.I must look into this, I'd do anything, almost, to drop two trews sizes.
What is the colour code and how did you apply it?Managed to get the van painted before it started spittin.
Still trying to rain, think I must be on the edge of the worst of it.
I used Nato Green satin BS285 and applied it with a roller and used a paint brush for the tricky bitsWhat is the colour code and how did you apply it?
I did have a look on sensible web sites and as usual it is a case of "don't take it to extremes", and yes possible kidney damage was one sort of damage mentioned.Well, the only drawback I hear people who don't do it shout about is "possible kidney damage", but there's lots of contradictory stuff floating around. You tube is your friend.
Oh, and look for articles on places like PubMed.
The yellow one is that a Hillman Tiger thay done them in red the only two colours?
Yes, looks very like a Hillman Avenger Tiger to me. With a large valve head and twin Weber carburettors they managed to get over 90 bhp out of the little 1500 engine, which was a lot in those days. Sundance yellow and wardance red were the colourways. Decent examples are getting very collectible now, and very expensive. It gave comparable machines like the Ford Escort Mexico a run for their money.The yellow one is that a Hillman Tiger thay done them in red the only two colours?
See post 118,704.Yes, looks very like a Hillman Avenger Tiger to me. With a large valve head and twin Weber carburettors they managed to get over 90 bhp out of the little 1500 engine, which was a lot in those days. Sundance yellow and wardance red were the colourways. Decent examples are getting very collectible now, and very expensive. It gave comparable machines like the Ford Escort Mexico a run for their money.
Moulded with a wire down the middleAnd made of clay. How is the stem formed Dips?
Hyundai i30 they seem to do pretty well with good reviews.My friend is looking for a car, needs to be unusual and not too expensive (2750) also smallish motor, 1.2 or 1.4 ish, petrol or diesel
Went with her to look at a very nice Citroen DS3 1.6 diesel
Had a cambelt and regular servicing , receipt for cambelt and recent service.
Engine hadn't been touched for years, all bolts rusted up etc and filthy engine oil on the bottom of the stick.
Think his garage has been ripping him off, left it where it was
Any suggestions on what cars to look out for ?