Usually because they are so heavy. Thereβs a new defender and it often struggles too again because of their weight while the old defenderers sail up the slope
Mormin all!
Nowt wrong with it, she just finds it hard to park in town so im selling it.
Sounds a lot like Ebola. Better get checked outFeeling all yuck today runny nose n sore napper. Tis dry here tho.
Probably leprosy. Don't blow your nose too hard or you'll lose itFeeling all yuck today runny nose n sore napper. Tis dry here tho.
Afternoon 
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Attachments
Last edited:
No, frost here, despite being 1.5Β°C, it seemed very dry in the air ...
I tried to a tiny bit of welding today, and it was awful.
I hang my head in shame. With the workshop round the other way the Sun was behind me and getting into my welding helmet and I could not see anything clearly. The cables were all strung across the floor like a set of "death-trap" safety hazards.
Just the worst ever. So maybe I will swap it all back round again.
I hang my head in shame. With the workshop round the other way the Sun was behind me and getting into my welding helmet and I could not see anything clearly. The cables were all strung across the floor like a set of "death-trap" safety hazards.
Just the worst ever. So maybe I will swap it all back round again.
Attachments
Not for me to judge , I'm useless as well
I've started to use 1.6 rods on 35 amps which gives me more time to get it straight before everything melts
WhiskyLassie
Well-Known Member
That's good, I'm out in the sticks.
WhiskyLassie
Well-Known Member
That's a good effort.
Hippo
Lord Hippo
Bnq do little wheelsAfternoon
Looking for inspiration
Need something like this only a lot smaller, and with L bracket rather than straight across.
Either that or a 5 or 6 inch diameter flat wheel with bearing I could bolt horizontal to chassis
It's to convert sideways to fore and aft on my steering, any ideas on what I could use/convert to make this happen please ?
Would have to be steel so I could weld arms on and have a bearing in the middle for stability
Hippo
Lord Hippo
Does yer need just the wheel and bearing int middle?Would have to be steel so I could weld arms on and have a bearing in the middle for stability
Does the wheel need to be metal or rubber tyre?
Can yer use a wheel like yer fit under a box that has its own bracket to hold said wheel?
Open to suggestions
Attachments
Hippo
Lord Hippo
Eye fink the rhs one will be strongerer. Use a wheel wiv bearing. Drill oles frew said wheel.Open to suggestions
