Applying a bit of logic to the physics under discussion today - as I see it, and now that the green house gases have sealed the heat within the atmosphere, it doesn't matter how you heat things up (energy wise), the heat will not be lost and the atmosphere will continue to get warmer. The planet as we know it is doomed.
 
Applying a bit of logic to the physics under discussion today - as I see it, and now that the green house gases have sealed the heat within the atmosphere, it doesn't matter how you heat things up (energy wise), the heat will not be lost and the atmosphere will continue to get warmer. The planet as we know it is doomed.
Well at least you are still cheery :)
 
Applying a bit of logic to the physics under discussion today - as I see it, and now that the green house gases have sealed the heat within the atmosphere, it doesn't matter how you heat things up (energy wise), the heat will not be lost and the atmosphere will continue to get warmer. The planet as we know it is doomed.
If (not saying we have) sealed heat in, We've also sealed it out ;)
 
Yer can get 15 years oot of a modern combi boiler. Me friend at wuk had to swop oot his donky years old boiler ferra new one to stop his mrs nagging their gas bill was far higher than others they know. His gas bill dropped by 2/3. He's now miffed at not doing it years ago. 2k6 sovs ferra boiler fitted. He drilled the exhaust ole imself.

Yer if I had a auld nagging donky id trade her in too 🤣 🤣
 
Went to wix last nite. When yer run yer paw over the ply wood its gottid ripples innit. Mdf is smooth. Gorra sheet of 18mm ply oft and stood up. Bent like a narna. Not easy to straighten oot. Did same wiv 12 and 18mm mdf. 18 much straighter than 12. Fink yer can gettid the last bit of bend oot by securing it to a frame. Will go back when eye is ready to get one but it will be from a new pallet as the ones on top should be straighterer.

Aye ye fink 🤣 I spend more time pulling all the timber out in the local yard to get straight bits tis a pita tbh :confused:
 

Similar threads