It's the Friday 13th curse
Great thanks for pointing that out, Now I know I am not going to risk working anymore today and down tools now
Not that I really need an excuse but that should get past M nicely
J
Great thanks for pointing that out, Now I know I am not going to risk working anymore today and down tools now
Not that I really need an excuse but that should get past M nicely
J
He's proving to be a bit of a dick then is he?The noob has decided that he'll come in to the office today even though he's coughing like a donkey!
I have found myself an empty office and will now isolate myself from him until I leave next week.
Done nowt much so far today. Waitrose delivered, so helped wifey put it away, big order like so many as xmas is being sorted. Hot Camembert coming up for lunch, yummy!
Sorted out the Humax box so it'll take catchup from all channels., Apparently wifey can't do this.
Flipping annoyed about a ceiling downlight in the recently been installed kitchen. Moved from previous location, i.e. had to cut a new circle, used the cutout to fill in the previous hole, extended the wire with a chocbloc, drilled through a floor joist to get the wire through, attached to new fitting. All done ages ago, but ever since the bulb flickers and eventually dies. Thort it was the bulbs but am now convinced it is in the wiring. Typically it is intermittent, but seems to start after a while as if the problem needs to warm up first.
Dreading having to cut out the original hole again to remake the connection. Not like me to make this sort of mistake so hoping it is the light fitting itself. (old fashioned non LED or halogen type, about 6 to 8 inches across takes big screw in bulbs.)
Still, door very nearly finished, one coat to go then hanging. Came with kind of clingfilm stuck on the glass panels which worked a treat when it came to keeping the varnish off the glass. Brill!
Have a good day folks!
Sorted out the Humax box so it'll take catchup from all channels.
, Apparently wifey can't do this.Flipping annoyed about a ceiling downlight in the recently been installed kitchen. Moved from previous location, i.e. had to cut a new circle, used the cutout to fill in the previous hole, extended the wire with a chocbloc, drilled through a floor joist to get the wire through, attached to new fitting. All done ages ago, but ever since the bulb flickers and eventually dies. Thort it was the bulbs but am now convinced it is in the wiring. Typically it is intermittent, but seems to start after a while as if the problem needs to warm up first.
Dreading having to cut out the original hole again to remake the connection. Not like me to make this sort of mistake so hoping it is the light fitting itself. (old fashioned non LED or halogen type, about 6 to 8 inches across takes big screw in bulbs.)
Still, door very nearly finished, one coat to go then hanging. Came with kind of clingfilm stuck on the glass panels which worked a treat when it came to keeping the varnish off the glass. Brill!
Have a good day folks!
Shimsteriom
Master Procrastinator
Dick the Donk, that works!Yep
Hicap phill
Well-Known Member
I’m in Staines...... I will be able to escape.
(As long as I don’t get punctures & the chap jet washes my wheels before leaving)
I’m glad it’s a Friday collection as my motor would smell like a swamp all week
Feeling a bit of a **** now.
I was cutting through the 3mm plywood that form the mini-shutters for the front windows on top of the breakfast bar.
I had a whole newspaper under the plywood sheet.
I still managed to go through everything and into the worktop underneath (even though the plywood had not separated at the cut-line)
Deep gouges on the work surface. Oops!
I scraped the tops of the gouges clear of the raised material and then gave it a light buffing with some 800 paper and then a coat of boot-polish and a buff with a cloth.
I did admit to it, as I knew she would spot it anyway. Now she's muttering curses that invoke the "New Onyx worksurface" beast. FFS! Its just a scratch.
I was cutting through the 3mm plywood that form the mini-shutters for the front windows on top of the breakfast bar.
I had a whole newspaper under the plywood sheet.
I still managed to go through everything and into the worktop underneath (even though the plywood had not separated at the cut-line)
Deep gouges on the work surface. Oops!
I scraped the tops of the gouges clear of the raised material and then gave it a light buffing with some 800 paper and then a coat of boot-polish and a buff with a cloth.
I did admit to it, as I knew she would spot it anyway. Now she's muttering curses that invoke the "New Onyx worksurface" beast. FFS! Its just a scratch.
Hicap phill
Well-Known Member
When the say make a bow wave...
Hippo
Lord Hippo
Has it felled over?
Last edited:
Hippo
Lord Hippo
Spag bol fer tee. Eye came oat wuk urly ter paint bits ov wud. Bits ter add ont me doors ter support me weeuls. Eye paint er bit un lerrit dry un turn it over ter paint tuvva bit. Then wipe me brush ont news paper un purrit int me strewberry yoggut pot wiv wata innit. Eye as alreddy eatid yoggut sum time ergo. Eye be sat int chair now.
A noo hat ...
Is that where I left it?
Ah so youve admitted ownership, I shall send you the bill for retrieving it then
Tomorrow has recently changed into a full workday as opposed to the usual part timer. Best off to bed. Night peeps.
Keeps safe an well you lot.
(Bonus is that weather will be crap an swmbo prefers the Tratter on blustery days )
Tigger can't wait..
Keeps safe an well you lot.
(Bonus is that weather will be crap an swmbo prefers the Tratter on blustery days )
Tigger can't wait..
Ah so youve admitted ownership, I shall send you the bill for retrieving it then
Send invoice to
- Mr J shimsteriom
c/o The Shop
Isle of Mann
Arse End of The Universe
