blue beasty said:
FFS I can't believe that it's really anything other that it's jammed and just needs freeing with a nudge in the right place :confused::confused:
Click to expand...
if only i knew the right place to nudge it:mad: was pushing shuvving and swearing at it for over an hr today..

dont wanna just tow it forward and risk fooking it up even more

3 of us couldnt push it backwards
 
I have an old LT77 gearbox just lying around doing nowt. Been under a cover for a couple of years. But as far as I know it's still ok If your gearbox is mullered. You're welcome to have it
 
redhand said:
I have an old LT77 gearbox just lying around doing nowt. Been under a cover for a couple of years. But as far as I know it's still ok If your gearbox is mullered. You're welcome to have it
Click to expand...
thanks joe..but no doubt if it was fooked then the clutch would also need doin while its apart and im totally skinto..but i will definately bear your kind offer in mind..thanks
 
wiltshire landyman said:
the only thing we havent done is tug it forward as its stuck in reverse i dont think its a good idea
Click to expand...


Im no eggspurt but a good tug will either sort it or ruin it... spare gearbox from pikey if needed what you got to lose by tuggin the fooker. :confused: :eek:

Or am I talkin a load of ****e :(
 
shirley do the easy bits first?

remove wading plugs n have a look.
taake out t box & gbox filler plugs. look at state of oil.
have a look at linkage - its not unusual to find it caked in mud.

then report back
 
blue beasty said:
Drop the props, roll it forwards, put props on, tug it back.

So long as I pass me mot this week I can stop by next weekend and give yous a hand
Click to expand...
im gonna have anuvver go tomoro night theres about 1ft space behind upto the wall

me mates gonna bring his disco over were gonna try and put something between his bumper and mine and try and push it back just the tad and see what it does:(
 
wiltshire landyman said:
thanks joe..but no doubt if it was fooked then the clutch would also need doin while its apart and im totally skinto..but i will definately bear your kind offer in mind..thanks
Click to expand...
how do you mean stuck in reverse ,you can move lever into neural but its still in rev or stick wont move ?,gearbox tops arent water tight ,
 
The Mad Hat Man said:
shirley do the easy bits first?

remove wading plugs n have a look.
taake out t box & gbox filler plugs. look at state of oil.
have a look at linkage - its not unusual to find it caked in mud.

then report back
Click to expand...
the transer linkage will move left to right but not up or down in hi or low,will check state of oils or salisbury plain mud tomoro night

dogsbody said:
If you don't mind slumming it I've got spare seats in a P38. I could pick you up and return you home and could do with all the help that I could get.
Click to expand...
thats bloody decent of ya:5bcheers2: i certainly would still like to make the day..i just hope n pray its a cheap fix,everything comes at the wrong bloody time
 
have yu got a good pressure washer? mite be the lesser of 2 evils to climb under and pressure wash all the linkage. Maybe (worst case) to pressure wash up the wading plug hole into the clutch area.
 
You must log in or register to reply here.

Similar threads

B
2013 Freelander 2 Motor swap from 2008
Replies
9
Views
510
Brent.Jodan
B
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
0
Views
448
Alex1000
A
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
16
Views
1K
Alex1000
A
B
Mistake with coolant flush?
Replies
11
Views
857
Bellhouse
B
D
P38 in need of some love
Replies
7
Views
874
stuu
stuu