Hard Drive

Active Member

• Mar 17, 2020

• #1

Having replaced the Torx screws on my Freelander 1, Td4, 2004, M47 Engine High Pressure Fuel Pump and its pressure regulator, I thought the following info might be of use to others.

There are 12 main-body screws, plus 2 for the regulator.

See the photo for sizes etc.
The Allen Key sizes are given too.
You will need to cut the screws to length as well.

 

Last edited: Mar 17, 2020

Arctic2

Well-Known Member

• Mar 17, 2020

• #2

What was wrong the original ones?

 

Hard Drive

Active Member

• Mar 17, 2020

• #3

Arctic2 said:

What was wrong the original ones?

Click to expand...

I discovered they, the original Torx screws, were made from mild steel that rounded-off easily. Rusty as hell too, which is probably why!!
This meant that out of the 12, 3 were difficult to remove and needed drilling-out followed by an Easyout!

 

Last edited: Mar 17, 2020

Arctic2

Well-Known Member

• Mar 17, 2020

• #4

Hard Drive said:

I discovered they, the original Torx screws, were made from mild steel that rounded-off easily. Rusty as hell too, which is probably why!!
This meant that out of the 12, 3 were difficult to remove and needed drilling-out followed by an Easyout!

Click to expand...

Thank you for your reply, seems an excellent modification so thank you for sharing