The wheels will just be pulsed by the TC. If you are grounded with the wheels in the air, you are stuck ;)
TC is designed to keep you moving with all wheels being braked when needed.
 
i thought TC systems when slipping decreased the power from the engine to try and sustain grip on the spinning wheel

could and prob wrong tho lol
 
Epicuser said:
That's what I understand. Or even if 3 wheels don't have any grip.....
Click to expand...

if tc works on all 4 wheels it doesnt matter what combination unless its all 4 ,tractors get round that by using a ground radar to measure wheel slip against forward motion
 
jamesmartin said:
if tc works on all 4 wheels it doesnt matter what combination unless its all 4 ,tractors get round that by using a ground radar to measure wheel slip against forward motion
Click to expand...

i never knew they had radar til i saw meteorite hunters last week!

they used it to detect over a massive field...it worked :)
 
Yes, if 2 wheels were up and 2 wheels had grip, it would pulse the brakes on the 'up' wheels to give power to the wheels whith grip.

If you were grounded on the chassis as well though, the 2 'down' wheels may not have had enough grip to move the car - did you notice whether the down wheels turned at all?
 
Im pretty sure the down wheels didn't move I had my head out of the window and I could hear the pump going but the front wheel was still spinning I was expecting to see it pulsing but it was just turning!
 
The TC works by pulsing the brake on the spinning wheels. This pulsing allows some torque to be transferred to the opposite side of the car. The brake isn't applied hard enough to stop the spinning wheels turning or the ABS ECU would loose the feedback from the sensors. TC works best in maintaining vehicle speed. It's not designed to get it moving if it's grounded!!
 
the freely 2 does seem far more capable in the problems you describe, mainly because the haldex will lock electrically before movement, whereas the vcu is always retarded in its behaviour.
 
Nodge68 said:
The TC works by pulsing the brake on the spinning wheels. This pulsing allows some torque to be transferred to the opposite side of the car. The brake isn't applied hard enough to stop the spinning wheels turning or the ABS ECU would loose the feedback from the sensors. TC works best in maintaining vehicle speed. It's not designed to get it moving if it's grounded!!
Click to expand...

I should have still been able to see the wheel pulsing though I would think?
 
Lol even with grip I think I would have struggled to get off that rock! looking back at my pics I took that pic after I'd tried to get off myself and noticed that I didn't think the TC was working, so I think if the wheels on the ground had turned you would be able to see it on the pic because as you say I think it would have dug a hole!
 
possibly either way Im not too fussed I was just a bit puzzled and wondered if it was yet another common fault, I feel quite proud that Ive managed to get an uncommon fault!!! lol
 
You must log in or register to reply here.

Similar threads

S
Spinning Wheel
Replies
15
Views
535
sierrafery
sierrafery
R
Upgraded stereo not working
Replies
4
Views
413
Atomician
Atomician
V
FL1 Td4 injector ident req'd.
Replies
1
Views
512
Alteredtech
Alteredtech
BeerHunter
Intermittent Traction Control Kicking-In
Replies
5
Views
2K
BeerHunter
BeerHunter
S
L322 SC Electrical Issues. Terrain control, Handbrake
Replies
0
Views
360
spitfire
S