matthew2riches · Feb 4, 2014

Removed the ACE system from the TD5 disco today. Nice and easy! Slip the belt off, change the pulley and removed old bottle and replace with a PAS bottle from another TD5 without ACE

Replace belt with non ACE model belt.

Just got to plug into IDS to tell the ECU that it doesn't have ACE now - that'll stop the light and binging noise and then swap the roll bars for normal ones from a non ACE model.

Reason why I done it? A small leak on one of the solid pipes running underneath. These are over £80 each! To remove the whole system - £80! The difference is hardly noticeable so worthwhile IMO

Co-Pang-Yang · Feb 4, 2014

Anyone got any suggestions for a price to sell my Disco at?
Gonna get the wax oiling finished inside and out then sell it of either a set of 255/70 AT's or 35 MT's.
Struggling to find matching trucks to compare prices.

matthew2riches · Feb 4, 2014

Co-Pang-Yang said:
Anyone got any suggestions for a price to sell my Disco at?
Gonna get the wax oiling finished inside and out then sell it of either a set of 255/70 AT's or 35 MT's.
Struggling to find matching trucks to compare prices.

What are you replacing it with?

Co-Pang-Yang · Feb 4, 2014

Car, late Impreza turbo if I can afford it. Or just cheap ****ter for now.
Cabriolet is going as well

turbominij · Feb 7, 2014

my other half brought a 04 WRX estate and loves it she wishes she has brought one years ago rather than other cars she had if you get one Your wont regret it

Co-Pang-Yang said:
Car, late Impreza turbo if I can afford it. Or just cheap ****ter for now.
Cabriolet is going as well

Co-Pang-Yang · Feb 7, 2014

Old man has had three over the years, his last, a 05 WRX Prodrive wagon was lovely.
Just gotta sell the Disco and Astra first.

turbominij · Feb 7, 2014

yer kims has the prodrive kit (well will have once i get the ecu fitted in next week or two) gotta love the sound of a scooby

Farrar · Feb 20, 2014

Any of you laning this sunday. Couple of us from herts are coming down. Going brentwood way.

wangie46 · Feb 24, 2014

Graham here's the pics of the Southdown
Air filter fitting and placement

BAFC0D7A-C34F-4311-A31B-F85E7E64522F-1441-0000016001E08BFF_zpsa7978073.jpg

Wing and window fitting

0B2A236F-8951-4C19-B41C-8037D0A91536-1441-0000015FFEBECBCF_zpsfcc20c56.jpg

F88D5A51-E292-4758-B8B7-981F79537749-1441-0000015FFBBA1F63_zps3d0a36ad.jpg

666 george · Feb 25, 2014

Cheer Ian, but I think mines going to have to stay on the passager side. Now all I need is spare couple of hours to do it.

barnes2010 · Feb 28, 2014

Any of you chaps know why Essex off road has closed just says closed till further notice on the web site.??

turbominij · Feb 28, 2014

Environment agincy closed it something about diesel in the river

barnes2010 · Feb 28, 2014

Oh **** that's not good have to look for somewhere else then.
cheers for that.

wickford90 · Feb 28, 2014

barnes2010 said:
Oh **** that's not good have to look for somewhere else then.
cheers for that.

Bures or Rochford only others local

barnes2010 · Mar 1, 2014

I've been told bures is too sandy.and it kills Cars.

wickford90 · Mar 1, 2014

barnes2010 said:
I've been told bures is too sandy.and it kills Cars.

If your worried don't go through the muddy water, make sure your motor is greased up properly and give it a pressure wash afterwards.

Drizz · Mar 2, 2014

Blimey! Another one!

Brian S · Mar 2, 2014

It's been so quiet on here lately my landy is turning into a car. :lol:

1997 Discovery · Mar 2, 2014

That engine bay is spotless

turbominij · Mar 2, 2014

That engine bay needs a liberal coating of mud !!!!! It's criminal like that

New Member

Well-Known Member

New Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

New Member

Active Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Active Member

Similar threads