Mmmm' wired new radio in to landy! When interior light comes on - radio goes off! When light goes off - radio comes on! Any ideas, the old radio worked ok, but it was held together with masking tape!

Answer, if you want the radio on, take out the interior bulb, simple's
 
Someones wired it up to a live thinking its the right one when in fact its the switched earth of the light i reckon
 
Dislocation cones fitted yesterday :D

311214_226059940785298_100001438828659_661176_492177913_n.jpg


Not sure its a good idea sticking the pics up of how i got the articulation to get the spring out :rolleyes::D
 
Yer I am interested Chris, looks loads better than the **** i have :D will the runners come off so they are easier to fit to the landy ones?

Matt, Might be an idea to have someone park their truck near the roadside so anyone coming along can see when they are in the right area :)


ok, dont try this at home kids :doh:

























296263_226059550785337_100001438828659_661174_1657410192_n.jpg


296559_226059300785362_100001438828659_661173_872706585_n.jpg


:D
 
Mmmm' wired new radio in to landy! When interior light comes on - radio goes off! When light goes off - radio comes on! Any ideas, the old radio worked ok, but it was held together with masking tape!

You might of wired it to the switched side of the power so that you can turn it onwhen the ignition is off, that would then switch off as the relay is energised to bring in the door contacts...... just a thought,

Best place is have a look in the electric sunroof switch compartment, there is a ignition switched power for the sunroff in there, thats what I have used but get fed up with the Rig switching off with the ignition , I am going to run a seperate power for it.
 
That is the only down side the subframes and seats are pretty much all one piece.
Way I was going to do it was cut the bolt holes off the bottom and weld a bar at the front then weld that to the Landy subframe. Bit of farting about but realm no more difficult than fitting my Scooby seats.
 
Code:
Yer I am interested Chris, looks loads better than the **** i have :D will the runners come off so they are easier to fit to the landy ones?

Matt, Might be an idea to have someone park their truck near the roadside so anyone coming along can see when they are in the right area :)


ok, dont try this at home kids :doh:

























296263_226059550785337_100001438828659_661174_1657410192_n.jpg


296559_226059300785362_100001438828659_661173_872706585_n.jpg


:D

Tusken fook your luck wouldn't even think of putting my hands near the springs with it like that you must have a death wish:)
 
That is the only down side the subframes and seats are pretty much all one piece.
Way I was going to do it was cut the bolt holes off the bottom and weld a bar at the front then weld that to the Landy subframe. Bit of farting about but realm no more difficult than fitting my Scooby seats.


I think i will pass mate. Havent really got time to mess around with them and nowhere really to keep them till i do. Thanks for the offer though.
 
So the ****in ****ers that should have been supplying the spare parts I'd ordered sent the ****in things by Royal Mail standard parcels and not the next day carrier I'd paid for!!! They are not going to be here in time :mad: :mad: :mad:

HEADS WILL ROLL WHEN THEY OPEN TOMORROW MORNING.

Will need to nip down to Landypart and grab all the bits I need now at nearly double the price :mad::mad::mad::mad::mad::mad:

Bastard!! :doh:
 
Well the bill for Sunday's off road day keeps rising.

So far it's a new mirror, power steering pump, wheel balance as it's been crap at 70mph since then, now I've just noticed a cracked headlamp that was not like it before. :(

Roll on Wales.

I've got a few jobs to do at the weekend now as my engine smoking is getting worse and there is low power until it warms up and then it ain't great.

Going to check the timing tonight as although it's a dirty job it's a job I can do for free.
 
So the ****in ****ers that should have been supplying the spare parts I'd ordered sent the ****in things by Royal Mail standard parcels and not the next day carrier I'd paid for!!! They are not going to be here in time :mad: :mad: :mad:

HEADS WILL ROLL WHEN THEY OPEN TOMORROW MORNING.

Will need to nip down to Landypart and grab all the bits I need now at nearly double the price :mad::mad::mad::mad::mad::mad:

Bastard!! :doh:

:doh: I have rear pads if you need those, you can then give me the ones your ordered when they turn up :)
 
Well the bill for Sunday's off road day keeps rising.

So far it's a new mirror, power steering pump, wheel balance as it's been crap at 70mph since then, now I've just noticed a cracked headlamp that was not like it before. :(

Roll on Wales.

I've got a few jobs to do at the weekend now as my engine smoking is getting worse and there is low power until it warms up and then it ain't great.

Going to check the timing tonight as although it's a dirty job it's a job I can do for free.

What the hell did you hit then........

Wait for Wales..... its all rock out there, pus the odd woolly thing

My wheels have gone out of balance but that will be all the mud i have in the wheels, but hey, it'll fall off...

I did ask one of the young lads in the flats if he would was it for me.... his mum is HOT;););):p:p:p:p:p.... well it gave me a reason to tak to her.....:D:D:D:D:D.

He said no.....
 

Attachments

  • 2011-09-22 18.36.16.jpg
    2011-09-22 18.36.16.jpg
    196.8 KB · Views: 112
  • 2011-09-22 18.12.54.jpg
    2011-09-22 18.12.54.jpg
    262.3 KB · Views: 107
What the hell did you hit then........

Wait for Wales..... its all rock out there, pus the odd woolly thing

My wheels have gone out of balance but that will be all the mud i have in the wheels, but hey, it'll fall off...

I did ask one of the young lads in the flats if he would was it for me.... his mum is HOT;););):p:p:p:p:p.... well it gave me a reason to tak to her.....:D:D:D:D:D.

He said no.....

You sly old fox you stu:D
 

Similar threads