L

Leakydiff

Member
I fitted the EGR blanking kit to my 2005 TD5 last night. Blanked off the vacuum pipes to EGR and unplugged electric plugs to 2 solenoids. Advice on the net seems to be conflicting: some say that ECU will now realise that EGR not available and adjust accordingly. Other people do not mention unplugging.
I am having the JE motorworks Tune + next week and they mention switching off the EGR function. Not that keen for that, as will have to return to them if it needs to be re-installed for any reason.
So my question is- will the ECU now recognise EGR defunct ?
 
Generally accepted that breathing oily, smoky exhaust fumes bad for engine and reduces longevity. Gums up intake manifold and sensor.
Not fitted to rest of world spec and will be taking this landy to do circular rout of southern Africa.
 
Leakydiff said:
Generally accepted that breathing oily, smoky exhaust fumes bad for engine and reduces longevity. Gums up intake manifold and sensor.
Not fitted to rest of world spec and will be taking this landy to do circular rout of southern Africa.
Click to expand...

All these things are serviceable and if you want it to stop breathing oily air remove the turbo charger as well. You may also like to look at the "New rules for MOT 2018" thread. :D
 
Your reply seems a bit combatative-any reason ?
It seems a bit STUPID to remove a necessary component and comparing it to a useless "big brother" component.
 
Leakydiff said:
Your reply seems a bit combatative-any reason ?
It seems a bit STUPID to remove a necessary component and comparing it to a useless "big brother" component.
Click to expand...

You said breathing oil damaged the engine. Any oil it breaths through the EGR valve comes from the turbo. It will continue to breath oil after the EGR valve has gone. Yes it was a little jocular quip.
 
Leakydiff said:
I am having the JE motorworks Tune + next week and they mention switching off the EGR function. Not that keen for that, as will have to return to them if it needs to be re-installed for any reason.
So my question is- will the ECU now recognise EGR defunct ?
Click to expand...
It depends on the fuel map config ID, it can recognise it or not but dont bother with that, just unplug the solenoids and isolate well the plugs as to not touch earth and even if you'll have an "EGR stuck closed" fault code logged this will not affect the engine's behaviour, also if that EGR delete in the soft is not extra charged by the tuners better do it and then even if you'll have to refit the valves the EGR will not open to let exhaust gas in the inlet and i doubt that they'll plug in a tester at the MOT station to check for the tune configuration.... as i saw in other post if you let the engine cover on nobody will know if you have EGR or not as long as the solenoids are still there and plugged in cos afaik they dont have the right to take off the engine cover... as about the environment, only a 100% well working EGR will have good effect for that cos an old clogged or stuck system will make the emissions worst than without it
 
Yes, there will always be some oil from the turbo, but much more sludge and carbon build-up above and in EGR valve as diesel smoke is pretty horrible stuff.
 
wammers said:
All these things are serviceable and if you want it to stop breathing oily air remove the turbo charger as well. You may also like to look at the "New rules for MOT 2018" thread. :D
Click to expand...

one less item to service along with other things

depending on build date the engine then becomes a euro spec for example a euro 2 or 3 engine does not need to meet euro 4.. 5 ..6 or 7 specs

even a new turbo may bleed .... nature of the system

unfortunately its natural for a charged engine to breath more than a naturally aspirated engine. so why dont we just remove the engine ? ..or maybe just add in a catch can ... every little bit helps right

another example how many old trucks on the road to this day that dont have EGR systems and the breather pipe is direct to atmosphere... do these need to meet new 2018 emissions ?

yes emissions are getting tighter as we speak some manufactures moved away from the EGR and installed urea systems (addblue ) some manufactures also combined both EGR and urea... but they can be deleted and tricked also with the correct tools and software /hardware

my egr has been deleted for some time over a few years....engine oil stays cleaner for longer due to less carbon contamination ...no more map sensor clogging nor intake clogging this means i can spend more quality time else where like in the bedroom :)

why would you want your investment to inhale an inert gas ?
 
Last edited:
ozzyboydeano said:
one less item to service along with other things

depending on build date the engine then becomes a euro spec for example a euro 2 or 3 engine does not need to meet euro 4.. 5 ..6 or 7 specs

even a new turbo may bleed .... nature of the system

unfortunately its natural for a charged engine to breath more than a naturally aspirated engine. so why dont we just remove the engine ? ..or maybe just add in a catch can ... every little bit helps right

another example how many old trucks on the road to this day that dont have EGR systems and the breather pipe is direct to atmosphere... do these need to meet new 2018 emissions ?

yes emissions are getting tighter as we speak some manufactures moved away from the EGR and installed urea systems (addblue ) some manufactures also combined both EGR and urea... but they can be deleted and tricked also

my egr has been deleted for some time over a few years....engine oil stays cleaner for longer due to less carbon contamination ...no more map sensor clogging nor intake clogging this means i can spend more quality time else where

why would you want your investment to inhale an inert gas ?
Click to expand...

Yes i am aware of Euro specs. Tell me how an EGR contaminates the engine oil.
 
wammers said:
Yes i am aware of Euro specs. Tell me how an EGR contaminates the engine oil.
Click to expand...

blow by
like i said its natural for a charged engine to have more blow by ( BREATHING ) for example 15 to 19 psi of pressure on top of a piston compared to a naturally aspirated engine

blow by has contamination of carbon or even dust that the air cleaner may of missed along with the combustion process
 
Last edited:
wammers said:
Yes i am aware of Euro specs. Tell me how an EGR contaminates the engine oil.
Click to expand...
a little trick i learned due to my trade

remove your dipstick and wipe with index finger.. now rub index finger and thumb massaging the oil does it turn clear ?

why would you want your investment to inhale an inert gas ?
 
Last edited:
ozzyboydeano said:
blow by
like i said its natural for a charged engine to have more blow by ( BREATHING ) for example 15 to 19 psi of pressure on top of a piston compared to a naturally aspirated engine

blow by has contamination of carbon or even dust that the air cleaner may of missed along with the combustion process
Click to expand...

Yep i'll live with that. Specially if the engine is an high miler. It does pay to change the oil in any diesel engine at half the makers recommended mileage. But the EGR only comes on at cruise never under load so there will be nothing like full boost when it is operating.
 
Last edited:
wammers said:
Yep i'll live with that. Specially if the engine is an high miler. It does pay to change the oil in any diesel engine at half the makers recommended mileage. But the EGR only comes on at cruise never under load so there will be nothing like full boost when it is operating.
Click to expand...

this was the hole idea of the egr system they worked out that a vehicle does more time cruising light traffic work so the EGR is then active also its not active at idle
but your forgetting
the build up of carbon with mixed breathing gasses
over time the intake plenum becomes sludged up or baked
this sludge can move due to heat soak even after an EGR delete

this is why i removed my intake manifold and burnt out the carbon build up only to find the intake ports 20 % coked up reducing size

under full boost are you suggesting your piston rings have a 100% seal under full boost

blow by does not switch off regardless of boost levels to be honest its actually the other way round more boost means more blow by regardless how old or new
 
Last edited:
Anycase- delete done and immediate improvement in performance and smoothness. Egr valve and intake manifold fairly clean. Then Tune+ and even better! Chalk and cheese! Next stop upgraded oil pump as per German landrover engineer friend.
 
wammers said:
I have not read the new MOT procedures fully but i can imagine that any EGR unit removed or disabled will be a fail.
Click to expand...

hi mate and ur spot on

was chatting to a mot examinier and he said with the new rules that if any vehicle regardless of age or engine had an egr fitted at the factory and was removed it will indeed be an instant fail

along with being able to check through the vin of what was and wasn’t fitted
 
You must log in or register to reply here.

Similar threads

ryan_1993
Fitting a new engine loom 300 tdi
Replies
0
Views
466
ryan_1993
ryan_1993
C
Intermitent power loss
Replies
0
Views
936
CThody
C
onza120
Freelander 1 TD4 Auto EGR without EGR Cooler
Replies
2
Views
895
onza120
onza120
U
Disco 2 Egr blank, broke coolant hose?
Replies
4
Views
2K
Ush
U
S
Fuel injector pump replacement 300 TDI engine – please help.
Replies
2
Views
2K
D1Nut
D1Nut