sijwhite
Active Member
No, it was this one Landrover Freelander Td4 Fuel Pump Under Wheel Arch 02 | eBay
What year is your Td4?
sijwhite
Active Member
Yep, that's it
iceeman
Member
my freelander is 2006 year td4,,had rover engine freelander before this and no problems like this, was a little under powered,,
sijwhite
Active Member
Mine is an 06 too. It's definitely the under wheel arch pump you need. Get a fuel filter too and change that while you're at it.
iceeman
Member
i got fuel filter and the rest to do a service, think i buy one of these too
Maxiscan Diagnostic Scanner CAN Code Reader OBD2 EOBD OBDII MS300: Amazon.co.uk: Car & Motorbike
be handy to reading code faults,, have a bluetooth version but can't find the password to link it laptop by bluetooth ,,
sijwhite
Active Member
I've got one of these. http://www.scangauge.com/products/scangaugeii/ Reads codes and gives useful information too.
iceeman
Member
cheers, i have a look, did you buy from there site or a online shop in europe
would this be same fuel pump as you got ?
sijwhite
Active Member
I bought it from their site.
The fuel pump I linked to is the same as the one I bought.
iceeman
Member
i sent scangauge 2 for a price for postage to Ireland, i should get a e-mail later,, my grease monkey friend said he run a Diagnostic Scan later
to see any code errors,, if it doesn't, i do fuel pump, if that doen't work i change maf sensor
i bought this 2 months ago to replace my older freelander
sijwhite
Active Member
Thinking about it I changed the MAF sensor at the same time, although I'm not sure I needed to do so. But I was doing over 1,000 miles a week at the time so I just needed the car to be running as well as it could. It's been pretty much perfect since. (Touch Wood
)
iceeman
Member
im told it can be a few things with these bmw engines, i just found out i need a PIERBURG OEM Quality 7.22684.11.0 whiich cost more im told, so im trying to see what the land rover ref part to this isThinking about it I changed the MAF sensor at the same time, although I'm not sure I needed to do so. But I was doing over 1,000 miles a week at the time so I just needed the car to be running as well as it could. It's been pretty much perfect since. (Touch Wood
im a little confused
im told now its either Pierburg 7.22684.09.0 or Pierburg 7.22684.09.0
i even gave my vin number , so far im getting all types of maf sensors,,
Last edited:
the td4 ( bmw m47r diesel engine) freelander1 ..
ONLY uses the Bosch maf: F 00C 2G2 029
the engine mapping for the freelander1 td4 .. is different to the same engine in a bmw .. ( a.f.a.i.k. )
~~~
UNLESS you have a Synergy2 tuning module fitted .. or Mafam unit from the same company .. in which case the Pieburg maf 7.22684.07.0 can be used to replace the bosch maf ..
~~~~~~~
the td4 uses a MAP sensor .. ( Manifold Absolute Pressure )
do you have pic of that 'hole' ?
Last edited:
here's a pic of the MAP sensor ..
( although here it's called a boost pressure sensor )
pic be from:
http://www.rover-club.net/graphics/manuals/16/m47r_diesel.pdf
( although here it's called a boost pressure sensor )
pic be from:
http://www.rover-club.net/graphics/manuals/16/m47r_diesel.pdf
Attachments
iceeman
Member
has bosh maf sensor in it , my td4 is 06 so the Pierburg 7.22684.09.0 be ok ?
you see where the battery cable touches the black plastic is where a hole is,,
what more confused about , is , he checked it with snap-on Diagnostic Scanner and he got a fault of boost error and he told me i need to get a boost control sensor, he tells me its near the turbo, i ran dealer and they never heard of it ?
