G

Giggsy

New Member
I've done a quick search and couldn't find an answer soooo is it possible to double crank a standard trailing arm?? Any measurements angles etc would be great. Cheers
 
Glb8686 said:
Hes not just bent them, they've been welded and strenghened also
Click to expand...

is it a bit of angle iron welded to them, seen it in action, no better than standard in my opinion,
if your serious try the adrenilin stuff, or glwn lewis
 
How can a strengthed arm be the same as standard? Obviously proper aftermarket arms are better but that wasn't the question.
 
Glb8686 said:
How can a strengthed arm be the same as standard? Obviously proper aftermarket arms are better but that wasn't the question.
Click to expand...

I agree with that, angle iron welded on aint gonna be pretty but definatly tuffer.

:)
 
tom69 said:
I agree with that, angle iron welded on aint gonna be pretty but definatly tuffer.

:)
Click to expand...

it dont work, ask disco tim, standard arms are ****e a bit of bed iron dont make them good,
but if thats what you want to do, then good luck, the aa is waiting
 
it makes me chuckle, you ask the question
but when the answer dont suit, you just argue the difference
 
Sleeve them with scaffold tube or steam pipe.
Fully weld all the joints, then crank them in a pipe bender as one unit.

Not had one break on me yet. Touch wood.
 
johnlad said:
it makes me chuckle, you ask the question
but when the answer dont suit, you just argue the difference
Click to expand...
My opinion is free for you to read, take it or leave it, i dont give a ****. So #### you. You little scroat, just because you think you know best about everything you've read on the net dont make you an expert. ####
:mad:
 
tom69 said:
My opinion is free for you to read, take it or leave it, i dont give a ****. So #### you. You little scroat, just because you think you know best about everything you've read on the net dont make you an expert. ####
:mad:
Click to expand...

nothing to do with whats read on internet, just through much off roading experience, leading groups , military etc, seen these thing in theatre,
also I ain't a little scroat,
you dont know me, probably a good thing, but look forward to meeting up, you could perhaps show me the error of my ways, lol
somehow I dont think so though, bellend
 
I'd love to me up, anytime you fancy the trip im waiting, but you wont cause your all gob.

I'll hang back from ****ting myself yet.
 
I'm nearby and have a phone that can video stuff :p inbred from blackpool vs what i presume could be an inbred from the south :D
 
You must log in or register to reply here.

Similar threads

T
Disco 2 Chassis welding advice - near rear trailing arm bracket
Replies
6
Views
2K
frostythor
frostythor
pocketrocket
Disco 300tdi sluggish power
Replies
5
Views
403
pocketrocket
pocketrocket
rangie1998
P38A EAS some more questions!
Replies
16
Views
1K
rangie1998
rangie1998
D
Automatc Transmission adaptions
Replies
11
Views
674
Datatek
Datatek
Moorhouse2
Series 3 Gearshift Jammed in Neutral on S3
Replies
15
Views
870
tottot
tottot