dag019
Well-Known Member
I don't use a gasket sealer, but depending on the usage will coat liberally with hylomar blue e.g. the fuel sender on the MGA which some genius of an engineer thought would be perfectly placed halfway down the side of the tank rather than in the top!
doriz
Well-Known Member
Jesus this durdy doosel is kicking my arse. Removed the manifolds this arvo, no seized bolts or nuts. Hardly expected it either as the engine is caked in congealed oil. Anyhoo, I notice the manifold gasket has a bit missing. The plan wasn’t to twiddle with the injun as it would be rebuild at a later date. Rocker, oil filler, sump and now the exhaust gaskets to replace and then to observe if it still leaks like a snitch. Durdy durdy doosels.
Attachments
Hicap phill
Well-Known Member
What’s wrong with it under he seat?
Early battery trays on S2 in engine bay but not always big enough for the large batteries needed for the engine crank time
doriz
Well-Known Member
Battery box under seat is rotten and needs replacing. As I have the space under the bonnet I was simply scoping the possibility of housing it there. I can then put tool trays under each seat base for the same price.
Hicap phill
Well-Known Member
YRM do good battery/seat base items. Even do a conversion for the middle seat to have a tray under it.
You could always make a new one under the bonnet. Make from angle iron to size to suit
doriz
Well-Known Member
That’s what I was thinking.
Hicap phill
Well-Known Member
Its not like you are short of space if you leave the front end alone
Put it passenger side so cable run to alternator is shorter
Where is the air filter housing?
doriz
Well-Known Member
Driver side, oh and there is a defender coolant reservoir next to that which eats space.Its not like you are short of space if you leave the front end alone
Put it passenger side so cable run to alternator is shorter
Where is the air filter housing?
Hicap phill
Well-Known Member
Is that not bolted to the wheel arch?
Post a photo. This could be moved.
But if you our battery on drivers side you cover up the steering box
doriz
Well-Known Member
Aye good idea. Need to tackle the washer motor as it’s kaput so will look for an alternative spot.
dag019
Well-Known Member
As they are defender wings you could Fit the later style washer bottle in the same place that tucks under the wing sitting on the wheeL arch rather than moving.
doriz
Well-Known Member
Can we bring in an umpire?
Hicap phill
Well-Known Member
That are series wings…. Look by the servo. Different to defenders
doriz
Well-Known Member
That’s what I thought, though was open to a challenge.
doriz
Well-Known Member
Motivation is lacking,
I either a. do nothing b. go clean the en suit c. remove the stater motor, degrease it and ascertain why it’s sticking - burrits lunchtime nearly.
If I can find any motivation I think I’ll do the cleaning, cook some gyoza for lunch, starter motor, and then do nothing?
I either a. do nothing b. go clean the en suit c. remove the stater motor, degrease it and ascertain why it’s sticking - burrits lunchtime nearly.
If I can find any motivation I think I’ll do the cleaning, cook some gyoza for lunch, starter motor, and then do nothing?
Hicap phill
Well-Known Member
Have something to eat & then fall asleep under the motor….just don’t wake up in a hurry
