discomark10 said:
what if u were born with an extra finger?? ;)
Oh n where did you get the wing repair patch from?
Click to expand...

Well my misses would be very happy lol :D

The quarter panel repair patch was specially made by me. It is actually a road sign I had lying around which is made from polyurethane sandwiched between two sheets of 1mm Ali. I have a cunning plan to hide the colour....
 
Mr Noisy said:
good golly gosh that looks fabulous. my advice would be to never use it so you can savour the beauty!

imagine how you will feel when it looks like this for the first time:

128.jpg


its just TOO nice to get ****ed up, but thats what its built for :(
Click to expand...

That's just insane Sam. Absolutely brilliant and I can't wait to get down and dirty.

You know I could never understand why winches are mounted low at the front. They should be on the roof as that way you wouldn't have to get dirty while recovering lol

Looks like you were having lots of fun...... Superb
 
this is how it happened!

[ame="http://www.youtube.com/watch?v=Quje0hlKJcA&feature=player_embedded"]NORT 4x4 Greenlaning in north yorkshire - YouTube[/ame]
 
What a great vid. That lane is not really well used at the moment I bet. Should have done the river crossing afterwards lol. Nice.

Well today I bled the brakes using the ezibleed you suggested. I only used 11psi and it worked really well, very easy. The brakes are a lot better although when I build up pressure and keep my foot down, the pedal goes to the floor slowly.,I can only assume that theremismstill a little air in the system or the master cylinder is knacked. I am going to bleed again when the weather brightens as I spent all day in the rain just to try and finish it off. No kidding I was ****ed wet through lol.

Anyhow almost ready for the MOT now but the boot floor knackered all my drill bits so I need to get some more 3.8mm bits to finish it off.

So as soon as the sun comes out I will give her a wash and polish and then post some pics of her all done.
 
Just watched the video in #343, can just imagine some bobble hatters arriving and can only imagine their reaction. Ho Ho.
 
Hi

It didn't look like it had been driven for a while, pools were well settled. That massive pile of sludge ran down the hill and collected at the bottom as it was driven. I would have loved to find a river but we weren't anywhere near any that weren't TRO'd! :(

Bobble brigade may have pulled a face but there was no foul play to speak off.

And yes it is dalby, somewhere. Didn't see a person in the whole place, was a bit eerie tbh. There were lots of tracks around the place, would like to go back and spend a day there, there was lots of dry tracks aswell as this messy one.

Cheers.
 
GreenHornet said:
What a great vid. That lane is not really well used at the moment I bet. Should have done the river crossing afterwards lol. Nice.

Well today I bled the brakes using the ezibleed you suggested. I only used 11psi and it worked really well, very easy. The brakes are a lot better although when I build up pressure and keep my foot down, the pedal goes to the floor slowly.,I can only assume that theremismstill a little air in the system or the master cylinder is knacked. I am going to bleed again when the weather brightens as I spent all day in the rain just to try and finish it off. No kidding I was ****ed wet through lol.

Anyhow almost ready for the MOT now but the boot floor knackered all my drill bits so I need to get some more 3.8mm bits to finish it off.

So as soon as the sun comes out I will give her a wash and polish and then post some pics of her all done.
Click to expand...

Air in the system will make the pedal spongey. If the pedal slowly sinks to the floor with pressure on, you're either leaking fluid or the master cylider is knackered.
 
What a legendary vehicle!! Goddammit I need a body lift, then I can fit 35s!

Not sure if it would get inside work though, a major consideration!!
 
Oh and Ian, I tested my pedal (for you) yesterday and I'm afraid to say that once pressure is built up it is solid, and does not sink at all.

Sucks to be you right now :(
 
Mr Noisy said:
Oh and Ian, I tested my pedal (for you) yesterday and I'm afraid to say that once pressure is built up it is solid, and does not sink at all.

Sucks to be you right now :(
Click to expand...

Thanks chap. Yeah it does especially as I am trying to upload photos of the car and having issues doing that as well. :(
 
Mr Noisy said:
Hi

It didn't look like it had been driven for a while, pools were well settled. That massive pile of sludge ran down the hill and collected at the bottom as it was driven. I would have loved to find a river but we weren't anywhere near any that weren't TRO'd! :(

Bobble brigade may have pulled a face but there was no foul play to speak off.

And yes it is dalby, somewhere. Didn't see a person in the whole place, was a bit eerie tbh. There were lots of tracks around the place, would like to go back and spend a day there, there was lots of dry tracks aswell as this messy one.

Cheers.
Click to expand...


Looks a bit like well stuck woods?? which is also in Dalby Forest.. know someone who got his disco stuck there for 4 days. Took an ex army tracked haglund to extract it in the end.
 
GreenHornet said:
That's just insane Sam. Absolutely brilliant and I can't wait to get down and dirty.

You know I could never understand why winches are mounted low at the front. They should be on the roof as that way you wouldn't have to get dirty while recovering lol

Looks like you were having lots of fun...... Superb
Click to expand...

is there any need for this much mess :clap2:
 
Ok this is my attempt to upload some descent photos of the Green Hornet. I hope it works.


6d739a8b.jpg


d2b01676.jpg


4aa14c89.jpg


960b8589.jpg


ca50e9a0.jpg


It makes the next door neighbours Fiesta look like a dinky toy lol

795ee364.jpg



Yeah me :D
 
Last edited:
redhand said:
Very very nice...
Click to expand...

Cheers redhand, just have a few finishing touches before starting on the winch bumper and cage etc.

I have to sort out the white repair panels so they don't look an eye sore and then finish painting the chassis and front axle.

Hopefully a good start to the new year.
 
Happy New Year to all my thread followers

Thank you for all your help and support throughout the last few months. I look forward to much more banter and fun in 2012
 
Your disco looks brilliant fella, that really is something to be proud of !

Have you re-sprayed it or is the colour as u bought it ??
 
looks the mutz nutz mate.now stop messing and lets get it down waterlane :eek:
you have done a wicked job mate and you should be well chuffed with yourself.
 
You must log in or register to reply here.

Similar threads

G
Discovery 2 Wheel Arch Rust
Replies
19
Views
1K
Badger688
Badger688
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
A
1995 Discovery 300TDI Engine Issue - Thoughts
Replies
2
Views
512
shaynecm
S
B
Making my 1994 200tdi reliable
Replies
18
Views
1K
D1Nut
D1Nut
K
Disco 2 anti-rust protection on brake lines
2
Replies
31
Views
4K
tilly2
T