300Tdi cam belt replacement is a doddle.
https://www.landyzone.co.uk/land-rover/300tdi-cambelt-change-how-to.311367/
https://www.landyzone.co.uk/land-rover/300tdi-cambelt-change-how-to.311367/
Goc3k
Well-Known Member
Exactly, it adds charm!
Ahh result there then, saves a lot of arsing about.
Yup, loads of guides and help on the net, Saint. V8's is spot on. Other than the obvious (timing tools, and a belt kit) make sure you have a GOOD breaker bar to do the crank bolt back up, the 1/2" drive one I've had for about 10 years met its sorry end doing that bugger up, too much chinesium in it.
Tomushh
Active Member
Halfords had a sale on workshop tools and I have a 15% off voucher so went and bought a Halfords Professional ballbearing slider toolbox! Cost me £85, was £200! Thought I might as well with all the extra work I am doing on the landy haha
Got my new hub in the post so got straight on it, changed it all over in less than an hour. Done this so many times now, guess you could call me a pro lol
The disc was heavily worn and I had some spare rear discs so changed that over purely so I don't have to go back to it later
BAM! Done lol, told ya I was quick here!
Fitted new flange bolts as well as quite clearly my others decided they didn't want to leave the old hub. One thing I noticed now as this flange now sits right against the hub, when I used to lift the clutch up there was a quite noticeably audible DONK noise, i thought it was some play in the transfer box. Now that is completely gone!!! I've come to the conclusion the donk was this flange having about 5mm play each way because the bolts weren't all the way home. Result!
New pads as well
First time off the drive in a while hahaha
Shame as I pulled off the drive, the passengers side CV joint started clicking. This has always done this a little but never this bad. I realised after I pulled it back on the drive I left diff lock on so maybe it put extra strain on it I don't know. I've also got to sort the tracking out as it's obviously out a little but that's because I have a new steering bar. The Terrafirma steering damper is awesome. when turning the wheel wants to gradually return to straight line which is nice. Before it more or less stayed there a little. Now the wheel has a little bit of weight to it which I like as well.
Got my new hub in the post so got straight on it, changed it all over in less than an hour. Done this so many times now, guess you could call me a pro lol
The disc was heavily worn and I had some spare rear discs so changed that over purely so I don't have to go back to it later
BAM! Done lol, told ya I was quick here!
Fitted new flange bolts as well as quite clearly my others decided they didn't want to leave the old hub. One thing I noticed now as this flange now sits right against the hub, when I used to lift the clutch up there was a quite noticeably audible DONK noise, i thought it was some play in the transfer box. Now that is completely gone!!! I've come to the conclusion the donk was this flange having about 5mm play each way because the bolts weren't all the way home. Result!
New pads as well
First time off the drive in a while hahaha
Shame as I pulled off the drive, the passengers side CV joint started clicking. This has always done this a little but never this bad. I realised after I pulled it back on the drive I left diff lock on so maybe it put extra strain on it I don't know. I've also got to sort the tracking out as it's obviously out a little but that's because I have a new steering bar. The Terrafirma steering damper is awesome. when turning the wheel wants to gradually return to straight line which is nice. Before it more or less stayed there a little. Now the wheel has a little bit of weight to it which I like as well.
Tomushh
Active Member
Oh and forgot to mention the exhaust sounds mental compared to standard. Boost pin is great too. Shot up the road was a little taken back by how much a decat/straight through and *working* boost pin actually does.
Going to get a boost ring from Fourby at some point as well as I've heard that does wonders.
Going to get a boost ring from Fourby at some point as well as I've heard that does wonders.
Glad to see she's back on the road and very pleased the BP worked out for you
Now just in time for spring and you can get back out and enjoy it on a few lanes
Now just in time for spring and you can get back out and enjoy it on a few lanes
Tomushh
Active Member
Went out after work, had a good time even if it was only for 2 hours or so.
Before I went out I corrected the tracking as looking at it, it was off slightly. Even though I thought I measured the bar pretty ok! That completely stopped the CV from clicking but I will still replace it in the very near future.
Going up a hill I started to see the temp rise, nothing bad but certainly when it's 3/4 of the way to certain death you don't really want to continue driving. Good job I had my viscous fan spanner and fan in the boot! Side of the pilgrims way byway I was refitting in pitch black my fan. Back down to lovely temps. No idea why i decided against fitting it, didn't think it would need it. Rookie mistake!
Before I went out I corrected the tracking as looking at it, it was off slightly. Even though I thought I measured the bar pretty ok! That completely stopped the CV from clicking but I will still replace it in the very near future.
Going up a hill I started to see the temp rise, nothing bad but certainly when it's 3/4 of the way to certain death you don't really want to continue driving. Good job I had my viscous fan spanner and fan in the boot! Side of the pilgrims way byway I was refitting in pitch black my fan. Back down to lovely temps. No idea why i decided against fitting it, didn't think it would need it. Rookie mistake!
Goc3k
Well-Known Member
Evenings are only getting lighter now at least, supposed to be a cracker of a day tomorrow, ideal evening outing there as well methinks .
Smart chest from halfords, good price as well for one of them - for future use if you don't have one already is their trade card http://www.halfords.com/advice/motoring/trade-card/trade-card . I'd not bothered getting one for yeas as I assumed I'd have to fabricate garage based invoices and such, but turns out pretty much anyone can go in nowadays looking a bit scruffy with some ragged paper and get one... worked for me anyway after reading the tip on here! Ideal for when you need a battery or a wiper or some triviality in a pinch on a Sunday.
Surprised to hear it was creeping up the old temperature gauge while moving without the fan also, had the fan off mine since last summer without issue - got a temperature sensor plumbed in the radiator on the top plug and it never sees over 62c at the top of the rad while moving, even uphill (even if only at about 5-15mph). Might be worth seeing if your rad is clogged up, or spend even more money! Easier to change the cambelt with the rad off after all, grand excuse to burn wealth on a new one.
. Smart chest from halfords, good price as well for one of them - for future use if you don't have one already is their trade card http://www.halfords.com/advice/motoring/trade-card/trade-card . I'd not bothered getting one for yeas as I assumed I'd have to fabricate garage based invoices and such, but turns out pretty much anyone can go in nowadays looking a bit scruffy with some ragged paper and get one... worked for me anyway after reading the tip on here! Ideal for when you need a battery or a wiper or some triviality in a pinch on a Sunday.
Surprised to hear it was creeping up the old temperature gauge while moving without the fan also, had the fan off mine since last summer without issue - got a temperature sensor plumbed in the radiator on the top plug and it never sees over 62c at the top of the rad while moving, even uphill (even if only at about 5-15mph). Might be worth seeing if your rad is clogged up, or spend even more money! Easier to change the cambelt with the rad off after all, grand excuse to burn wealth on a new one
.
rob_bell
Well-Known Member
What do you need to get one? Not much of a clue on the website, other than register on-line and then go to a store???
Goc3k
Well-Known Member
I went in looking scruffy after registering with a payslip & ID, at the time I think with the work van on a weekend. The bloke on the desk glanced at my ID but nothing else, bish bash bosh off I went with some money off a set of hex keys .
The "trade" allowance extends to pretty much all trades, not just mechanic based.
.The "trade" allowance extends to pretty much all trades, not just mechanic based.
neilly
Well-Known Member
Mine was pretty switched on.
Luckily I had a business card for my "4x4 modification company" cost a fiver. Plus I also had a "receipt" for a job which I was about to "post" to the customer, had to tear the envelope open to show them.
Cheers
I'm self employed and carry a dozen business cards at all times so no drama there and I can print off an invoice at home, should be sorted by the end of tomorrow
neilly
Well-Known Member
I'm self employed and carry a dozen business cards at all times so no drama there and I can print off an invoice at home, should be sorted by the end of tomorrow
Luckily my "business card" and my " invoice " matched each other....LOL, cannot imagine how that happened...
Cheers
I get that, as well as "F'Kin hell that horn is loud" along with "your lightbar has burned the back of my corneas out" lol
But well done, what you planning on the sills? Box section?
Tomushh
Active Member
Yep, already got it ordered. Could only order in 7m lengths but they will cut it to 1400mm long for me, going to ask if they can do a 45 degree or so angle at each end so the box sections doesn't interfere with the wheels on articulation.
So I'll have a few spare, will likely do the same to my dads land rover and then sell the rest.
got 1400Lx60Wx100H mm 3mm thick cost about 70 quid
So I'll have a few spare, will likely do the same to my dads land rover and then sell the rest.
got 1400Lx60Wx100H mm 3mm thick cost about 70 quid
Joss155
Well-Known Member
I jet was the crud off but that's about it, every time he sees it there is something new and shiny on it so he knows I look after it.
