A

ANR

Active Member

• Jul 29, 2024

• #1

Can someone please suggest where this part goes on a Discovery 2, so I can put it back!?
I took out both front carpets, which also meant taking the seats out and the centre console. After I put things back together, this was left over.
The only mark on the black bar is a letter "R". I assume that the gold-coloured bolt goes with the black bar since the threads fit.

 

R

R-Two-D2

Active Member

• Jul 29, 2024

• #2

See if you can locate it in here, and give us an update...

https://new.lrcat.com/#!/1232

 

Andy Warren

Well-Known Member

Full Member

• Jul 30, 2024

• #3

I've just had a quick look under the seats of mine (it has cd changer & amp under there) but can't see anything like that. I don't recall seeing anything like that either when I last had the centre consol out,sorry.

 

meego

Well-Known Member

• Jul 30, 2024

• #4

Andy Warren said:

I've just had a quick look under the seats of mine (it has cd changer & amp under there) but can't see anything like that. I don't recall seeing anything like that either when I last had the centre consol out,sorry.

Click to expand...

Same here. I’ve had it all out and don’t recall that part either !! The fact it has an R On it suggests it’s sided though and there could be a mirror of it on the left. It might help if the OP told us why the seats, console and carpets were out.

 

M

misha_pl

New Member

• Jul 31, 2024

• #5

Hi,
This is a crossmember that links an angle bracket with dashboard support - look below the steering wheel, close to the air duct exit. The angle bracket is fixed by two nuts, the rear one should hold your link. Other side of your link, (the one with a nut) should be connected to the steering wheel column support.

 

Badger688

Well-Known Member

Full Member

• Jul 31, 2024

• #6

misha_pl said:

Hi,
This is a crossmember that links an angle bracket with dashboard support - look below the steering wheel, close to the air duct exit. The angle bracket is fixed by two nuts, the rear one should hold your link. Other side of your link, (the one with a nut) should be connected to the steering wheel column support.

Click to expand...

Have you got a picture for reference?? As I can't see this piece on Jaguar/Land-rover site!!

Kev

 

M

misha_pl

New Member

• Jul 31, 2024

• #7

Badger688 said:

Have you got a picture for reference?? As I can't see this piece on Jaguar/Land-rover site!!

Kev

Click to expand...

I can take it today evening, as I'll be at the garage. Below some stolen picture with location indicated in red - but it's actually hidden deeper under the cover.

 

Last edited: Jul 31, 2024

Andy Warren

Well-Known Member

Full Member

• Jul 31, 2024

• #8

Hi, is it the one that receives the fir tree fixing ? , see pic, there's a bracket like that(one either side) maybe why it has R on it & the other has L.

 

Attachments

• 
  20240731_114217.jpg

  309.6 KB · Views: 61

A

ANR

Active Member

• Aug 18, 2024

• #9

Brilliant. Thanks so much.
I took the carpets up because they were wet and I was trying to identify the water ingress point. This has also now been resolved.

 

Badger688

Well-Known Member

Full Member

• Aug 18, 2024

• #10

Thanks for the update.

Kev