jai_landrover
Well-Known Member
Brackets for 1 link on front axle
discomark10
Well-Known Member
Neither are fair off, but not right 
I'll give you a hint, its been removed from something to aid work for fitting.
I'll give you a hint, its been removed from something to aid work for fitting.
Last edited:
jai_landrover
Well-Known Member
I give up too tired got in at 2am after picking up noo tyres with teeth
discomark10
Well-Known Member
This should help
Oh and also done this
And this
Voltage gauge for both batteries
]
Oh and also done this
And this
Voltage gauge for both batteries
]
jai_landrover
Well-Known Member
That's gonna take some cleaning up dude!
200tdi ayre
Well-Known Member
Radius arm mounts,
Altered pinion angle ?
Altered pinion angle ?
jai_landrover
Well-Known Member
You really don't want be playing with pinion angle lr did what they can and compensated with the out of phase front propshaft yokes.
But very interested in what it will end up like!!!
P.s I picked up some better off-road tyres yesterday 10.50 100 r16's
Petla pattern but more open I think that are mitas
But very interested in what it will end up like!!!
P.s I picked up some better off-road tyres yesterday 10.50 100 r16's
Petla pattern but more open I think that are mitas
discomark10
Well-Known Member
All so close... its the d2 rear axle radius arm mounts.
I've cut the back part off so I can use the front part to bolt the trailing arms up to it. There in the same place just a tad further forward.
The aframe is getting changed to 2 links to turn it a proper 4 link.
I've cut the back part off so I can use the front part to bolt the trailing arms up to it. There in the same place just a tad further forward.
The aframe is getting changed to 2 links to turn it a proper 4 link.
discomark10
Well-Known Member
Yea I done as close as I could with the plasma... the rest will have to come off with a grinder.
discomark10
Well-Known Member
Yea im gona leave the pinion angles the same as im not running much of a lift once its all sorted.
got any pics of these tyres? 100 wall hight would be excellent, aboout 37" ?
discomark10
Well-Known Member
Got some bad new last night... My place of work is going to be moving from a 20min walk away to about an hours drive!
which means I need a cheap reliable car to get to work or find a new job.. so either way it screws me up with regards to the landy!
The other option is to get a new job close but I'm sure many of you know, atm it's easier said than done, but still leaves me high and dry landy wise.
So progress will likely grind to a holt soon, got these axles to play with and a couple small bits still to do mind you.
,
which means I need a cheap reliable car to get to work or find a new job.. so either way it screws me up with regards to the landy!
The other option is to get a new job close but I'm sure many of you know, atm it's easier said than done, but still leaves me high and dry landy wise.
So progress will likely grind to a holt soon, got these axles to play with and a couple small bits still to do mind you.
,
700Quid
Active Member
Second that... Pick up a cheap one and if you just use the cheap parts it'll cost you a lot less than a car to run.
Bit of a crapper I know, but every cloud and all that.. Second Landy
discomark10
Well-Known Member
I was thinking a E class, nice and big so it can tow a landy and they do 45mpg at 70 mph!
They have the TDI engine that peeps put into landys (seen it on LR4x4)
A Tdi disco will only do about 25-30 mpg but I do know them inside out!
They have the TDI engine that peeps put into landys (seen it on LR4x4)
A Tdi disco will only do about 25-30 mpg
but I do know them inside out!
700Quid
Active Member
I was thinking a E class, nice and big so it can tow a landy and they do 45mpg at 70 mph!
They have the TDI engine that peeps put into landys (seen it on LR4x4)
A Tdi disco will only do about 25-30 mpg
Yeah E55... Looking at that or a C55 as my next daily...
30 (cough 20) mpg...
