F

Fredy432

New Member

• Jan 10, 2015

• #1

Hi all my next door neighbour is trying to sort out a clutch problem on his old disco. Pedal wont depress I was thinking bearing? Thing is we are both a little perplexed lol. Any suggestion would be great thank you.

 

Iann

Active Member

• Jan 10, 2015

• #2

if the you mean the peddle is rock hard then this is probably the slave has gone to full reach
the clutch forlk may have worn through the privet ball

 

The V8 man

Well-Known Member

• Jan 13, 2015

• #3

I would say its the clutch fork i had the same symptoms and thats what it was

 

V

Vincemcdonald

Active Member

• Jan 14, 2015

• #4

Remove the slave cylinder. You can then check out the hydraulic operation. The rod that is attached to the clutch fork should be poking out of the bellhousing by about an inch. If it's flush with the bellhousing then your fork arm has failed.
Don't be tempted to pull on the rod as its only held in by a plastic clip and may come away in your hand.