Icarsoft has one advantage. Small and keep in glove box for roadside failures.

However, it only reads the engine ECU despite calls and emails to icarsoft. Tech support is rubbish. Mine shows my gearbox input shaft rotating at 16,500 RPM !! Car on idle.

PScan is the one to have to do all ECUs, as stated and the logging feature is great for intermittant faults. It does everything, except actuating the CANbus controlled items. That is on the to do list apparently!
 
keep in glove box for roadside failures.
there is a Raspberry Pi version. You can get small touch screens. Furious Driving make one and did a youtube video about it. Last time I checked it worked on an old Asus eeepc as well. I did get Linux running on a pretty cheap prototype RK3566 8" tablet but then the PineTab2 came out so I didn't bother with it anymore, but that's a whole other story and a year of my life that feels a bit wasted.
 
What can cause a petrol to cut off when hot ?
Ignition coils ? crank sensor ? Spark plugs ?
In the old days, it used to be the ignition switch. But that cut everything, so dash/radio etc would go out as well. Haven't heard of it happening for a while.
 
Petrol 1.8 motor cut out when hot? Mine did that a few years ago. I initially suspected an ignition problem so replaced the plug leads, distributor cap and rotor. Problem was still there. It turned out to be a fuelling problem - the filter on the fuel pump was clogged. I put a new fuel pump and filter in > Prob' solved.
 

Attachments

  • fuel pump pickup 1.jpg
    fuel pump pickup 1.jpg
    30.9 KB · Views: 38

Similar threads