LP fuel pressure is dropping low. 276 is too low. Would.expect 320 minimum.

Not sure what pressure it cuts the HP pump to protect it but LP fuel pump would be my next replacement. Get a good make. PIERBURG if you can get one.
 
LP fuel pressure is dropping low. 276 is too low. Would.expect 320 minimum.

Not sure what pressure it cuts the HP pump to protect it but LP fuel pump would be my next replacement. Get a good make. PIERBURG if you can get one.
Hy and thank you for your response. Any ideea of this is what i need?
 

Attachments

  • Screenshot_2025-02-22-17-33-20-94_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
    Screenshot_2025-02-22-17-33-20-94_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
    401.4 KB · Views: 5
Before you buy the pump. It is worth unplugging the hp sensor on the end of the fuel rail and the lp sensor which is down near the steering rack behind the battery.

Spray clean the connectors and try one more time

My TD4 has a lp pressure of 390 -425 kpa.

So 275 is very low.
 
Also, thinking of other possible causes.

There is a fuel filter in the tank unit with the fuel gauge sender. Access under rear seat and carpet.
 
Worth a read. This one turned out to be the LP sensor itself.

I will test tomorrow lp sensor and see. As an ideea, can you provide a part code for LP sensor because i can't find this part.
 

Similar threads