Went green laning with a mate today. Came across a nice bridge on the way back which we both floored it through, his 200tdi with straight through side exit exhaust is pretty loud too!
 
Went green laning and on the way back the tc and abs lights have come on, bugger I need to find someone to read the fault codes etc.
 
Got it diagnosed as a intermittent fault with the near side front sensor, got it adjusted and touch wood the lights won't come back on.
Also ordered led headlights and an led light bar from grp my Landy, hopefully it will arrive today some time.
 
:D pretty! Lightbar is pretty simple, just follow the loom really. I hooked mine up using an aux fuse box by Blue Sea.
 
:D pretty! Lightbar is pretty simple, just follow the loom really. I hooked mine up using an aux fuse box by Blue Sea.
I've also got a wireless remote for the light bar which is also meant to control the head lights but I don't have a clue how they wire into the loom, I've sent so many questions to grp my Landy, he's probally getting annoyed. He's been really helpful so far.
 
I've got one of those as well, equally not worked out how to wire it in. I want mine to control my rear lights but still operate off the dash switch, my mate is probably going to wire it in for me in about 6 weeks or so. Let me know how to get on!
 
Got all the wiring sorted for the bar(touchwood) just need to figure a way of getting it into the Landy from the bar, don't want to drill a hole in the roof, but that looks like the only option.
 
I didnt have that problem, got a cage on mine so i followed the cage down into the engine bay nice and neat :)

Surely you had to drill holes to mount the bar?
 
Last edited:
I didnt have that problem, got a cage on mine so i followed the cage down into the engine bay nice and neat :)

Surely you had to drill holes to mount the bar?
Yeah there's two holes each side, but there in the gutter, but if I drill a hole in the roof there's risk of getting even more water leaking in than already does.
I'll probally drill a hole in the roof, put a gromit in the hole feed the wire through then silicon the wire to the gromit, so I can still remove the bar if needed.
 

Similar threads