Is the delay timer relay still fitted as someone on here removed there's to check for leaks and that caused problems, just a random thought cider induced.
 
Another random thought while I'm waiting for my taxi to the airport.Does the car think a door or the tailgate is open and so preventing the car to raise?
 
Been back looking at the problem again, changed the tailgate lock (no change). Even the Nanocom has had enough, its cone up with disc error. Anyone know how to fix this problem?
 
Nanocom sorted, however now it seems that the compressor is not now filling the tank, its coming out under the exhaust, flowing into the drier and out through the top, into the block and not coming out of aperture no 5. all valves open when told to by Nanocom. perhaps this is the main problem. no air in tank noair to fill springs.
 
tarphenry said:
Nanocom sorted, however now it seems that the compressor is not now filling the tank, its coming out under the exhaust, flowing into the drier and out through the top, into the block and not coming out of aperture no 5. all valves open when told to by Nanocom. perhaps this is the main problem. no air in tank noair to fill springs.
Click to expand...

First thing you need is good air, as i have said many times before, "No airy no worky". That is why i asked if NRV 1 was in the right way round.
 
!!!!!!! IT,S WORKING>!!!!! Many many thanks to all who have offered advice, and a particular thanks to Wammers, who once again solved a problem by sheer will power. everything is now working properly with all new O rings and NRV,s .Once again thank you all
 
tarphenry said:
!!!!!!! IT,S WORKING>!!!!! Many many thanks to all who have offered advice, and a particular thanks to Wammers, who once again solved a problem by sheer will power. everything is now working properly with all new O rings and NRV,s .Once again thank you all
Click to expand...
well done mate, well done Wammers as well :)
 
Its nice when a bit of help and perseverance saves the day, and some would of just fitted sp****s, the shear thought is enough to spur on and fix it
well done.:):)
And Wammers was on the money again:):):)
 
There is no way that i would fit s*****s to such a beautiful motor. I havent been on top form lately but refuse to ruin my motor. again thanks to all.
 
You must log in or register to reply here.

Similar threads

Montyjohn
P38A Adding a valve to manually fill EAS tank and why did my pump fail again?
Replies
14
Views
960
Datatek
Datatek
K
Is my RR Classic in EAS shutdown?
Replies
12
Views
875
kevleaper
K
Flossie
P38A Eas issues
2
Replies
22
Views
1K
Datatek
Datatek
feyniriel
P38 EAS problems
Replies
18
Views
1K
pwood999
pwood999
J
P38A p38 EAS - immediate drop of pressure
Replies
11
Views
627
Mark Piercy
Mark Piercy