RodneyA

Active Member
I've taken my head off and was wondering if you can have a peek at the gasket and see if it looks ok

First 4 pictures are the gasket and last 4 are the gasket off.

I also can't seem to see these holes that tell me what thickness of gasket I need.

ImageUploadedByTapatalk1419969977.529745.jpg

ImageUploadedByTapatalk1419969988.516499.jpg

ImageUploadedByTapatalk1419969998.639148.jpg

ImageUploadedByTapatalk1419970006.175917.jpg

ImageUploadedByTapatalk1419970013.063422.jpg

ImageUploadedByTapatalk1419970021.083365.jpg

ImageUploadedByTapatalk1419970031.376212.jpg

ImageUploadedByTapatalk1419970037.908575.jpg
 
err5263 composite gasket, also its getting more fuel than air enough to burn it
 
Last edited:
Does the bits seem ok? the bores seem good. Maybe a teeney wee bit rough right at the top but no lip as such. Will pop some pictures of the head on soon.
 
The internals are for somebody else to work on. I'm too scared to touch them :D

Tho from what I can see they seem in good nick.

ImageUploadedByTapatalk1419973608.617739.jpg

ImageUploadedByTapatalk1419973632.094682.jpg

ImageUploadedByTapatalk1419973616.220043.jpg

ImageUploadedByTapatalk1419973625.258366.jpg
 
Main thing I have personally seen on a few 200 heads is cracking between the valve seats, doesnt seem to effect anything, just looks bad!
 

Similar threads