ROY SIMPSON
Active Member
It may be worth resyncing your key fob.
Open the car and sitting in the driver's seat remove battery from key fob, press lock / unlock buttons for several seconds to drain any residual charge, replace battery, then press lock button four times followed by unlock button once and this should resync key fob.
Open the car and sitting in the driver's seat remove battery from key fob, press lock / unlock buttons for several seconds to drain any residual charge, replace battery, then press lock button four times followed by unlock button once and this should resync key fob.
neilly
Well-Known Member
ROY SIMPSON
Active Member
It did for my 2002 td5 auto
For more info see I R 4x4 web site
Google replacing a battery in td5 key fob and look for 2 nd IR 4x4 thread on 2nd page.
neilly
Well-Known Member
Defender or Discovery?
sierrafery
Well-Known Member
That's not a method for D2 whatsoever, to change the battery in the fob you dont need ant synk'ing
neilly
Well-Known Member
Maybe there is some confusion going on,
he has quoted the Defender resync , which looks like he got it from a Defender fob issue page on LR4x4. I am waiting for him to come back and state it was on a D2.
Cheers
shaun69
Active Member
Hi all
Just an update:- As for resync that did not work, So i had a look at the rf receiver and one of the 8mm bolts was a bit rusty, So thought "yes". Cleaned it up and cleaned the earth contact, Put it back together and..........No still nothing so look like i need to get a new receiver.
But at lest i can now unlock the car with the key and it now turns the alarm off plus it turns the immobilizer off.
Any way thanks to all for your help and a big shout out to Neily thanks mate.....
Shaun
Just an update:- As for resync that did not work, So i had a look at the rf receiver and one of the 8mm bolts was a bit rusty, So thought "yes". Cleaned it up and cleaned the earth contact, Put it back together and..........No still nothing so look like i need to get a new receiver.
But at lest i can now unlock the car with the key and it now turns the alarm off plus it turns the immobilizer off.
Any way thanks to all for your help and a big shout out to Neily thanks mate.....
Shaun
neilly
Well-Known Member
Nice, good job Shaun,
make sure to order the correct RF transmitter, there are a couple of different ones.
Resync , pretty sure that never going to work, as I am 99% sure that is only for the Defender.
So, it now allows you to unlock , not set off the alarm and start up OK, with the key? which it did not Yesterday, damn those rusty bolts, LOL. Gotta love Landy's .
Cheers
make sure to order the correct RF transmitter, there are a couple of different ones.
Resync , pretty sure that never going to work, as I am 99% sure that is only for the Defender.
So, it now allows you to unlock , not set off the alarm and start up OK, with the key? which it did not Yesterday, damn those rusty bolts, LOL. Gotta love Landy's .
Cheers
ROY SIMPSON
Active Member
It worked for me on my d2 when I changed the battery without originally following the correct procedure and the key fob would not unlock the car until I had discharged any residual power in it.
shaun69
Active Member
Yeah mate its now letting me in and start it with out the alarm going off, Plus this is why we keep going back to them "got to love them to drive them"
All the mate.......
sierrafery
Well-Known Member
It means that the immobiliser is disabled
